Jambase Reference

Jambase is a base set of Jam rules which provide roughly make(1)-like functionality for jam, the Jam executable program. This document, which started out as the Jambase(5) man page, is a reference guide to the rules, pseudotargets, and variables defined in Jambase for use in Jamfiles.

For further information see:

• Using Jamfiles and Jambase
• The Jam Executable Program

Jam documentation and source are available from the Perforce Public Depot. For detailed information about any of the rules summarized below, see the Jambase file itself.

Jambase Rules

As obj.o : source.s ;

Assemble the file source.s. Called by the Object rule.

Copies sources into directory.

Compile the file source into object, using the C compiler $(CC), its flags $(CCFLAGS) and $(OPTIM), and the header file directories $(HDRS). Called by the Object rule.

Compile the C++ source file source.cc. Called by the Object rule.

(Unix and VMS only.) Change file permissions on target to target-specific $(MODE) value set by Link, File, Install*, and Shell rules.

Removes existing targets when clean is built. clean is not a dependency of all, and must be built explicitly for targets to be removed.

Expands a list of definitions into a list of compiler (or preprocessor) switches (such as -Dsymbol=val on Unix) to pass the definitions.

Copies source into target.

Expands a list of directories into a list of compiler (or preprocessor) switches (such as -Idir on Unix) to add the directories to the header inclusion search path.

Compile the Fortran source file source.f. Called by the Object rule.

Returns each of files suitably quoted so as to hide shell metacharacters (such as whitespace and filename matching wildcards) from the shell.

GenFile target : image sources ;

Runs the command "image target sources" to create target from sources and image. (where image is an executable built by the Main rule.)

Makes target a hard link to source, if it isn't one already. (Unix only.)

Arranges the proper dependencies when the file source includes the files headers through the "#include" C preprocessor directive.

This rule is not intended to be called explicitly. It is called automatically during header scanning on sources handled by the Object rule (e.g., sources in Main or Library rules).

Copy sources into dir with mode $(EXEMODE).

Copy sources into dir with mode $(FILEMODE).

Copy sources into the appropriate subdirectory of dir with mode $(FILEMODE). The subdirectory is mans, where s is the suffix of each of sources.

Copy sources into dir with mode $(SHELLMODE).

Process the lex(1) source file source.l and rename the lex.yy.c to source.c. Called by the Object rule.

Compiles sources and archives them into library. The intermediate objects are deleted. Calls Objects and LibraryFromObjects.

If Library is invoked with no suffix on library, the $(SUFLIB) suffix is used.

Archives objects into library. The objects are then deleted.

If library has no suffix, the $(SUFLIB) suffix is used.

Links image from objects and sets permissions on image to $(EXEMODE). Image must be actual filename; suffix is not supplied. Called by Main.

Makes image depend on libraries and includes them during the linking.

Image may be referenced without a suffix in this rule invocation; LinkLibraries supplies the suffix.

Compiles sources and links them into image. Calls Objects and MainFromObjects.

Image may be referenced without a suffix in this rule invocation; Main supplies the suffix.

Links objects into image. Dependency of exe. MainFromObjects supplies the suffix on image filename.

Creates dir and causes target to be built into dir.

Creates dir and its parent directories.

Compiles a single source file source into object. The Main and Library rules use this rule to compile source files.

Causes source to be scanned for "#include" directives and calls HdrRule to make all included files dependedencies of object.

Calls one of the following rules to do the actual compiling, depending on the suffix of source:

		     *.c:   Cc 
		     *.cc:  C++ 
		     *.cpp: C++
		     *.C:   C++ 
		     *.l:   Lex 
		     *.y:   Yacc
		     *.*:   UserObject

Add flags to the source-specific value of $(CCFLAGS) or $(C++FLAGS) when compiling source. Any file suffix on source is ignored.

Adds preprocessor symbol definitions to the (gristed) target-specific $(CCDEFS) for the object.

Add dirs to the source-specific value of $(HDRS) when scanning and compiling source. Any file suffix on source is ignored.

For each source file in sources, calls Object to compile the source file into a similarly named object file.

Marks sources as temporary with the TEMPORARY rule, and deletes sources once targets are built. Must be the last rule invoked on targets. Used internally by LibraryFromObjects rule.

Sets the setuid bit on each of images after linking. (Unix only.)

Makes target a symbolic link to source, if it isn't one already. (Unix only.)

Sets up housekeeping for the source files located in $(TOP)/d1/.../dn:

• Reads in rules file associated with TOP, if it hasn't already been read.
• Initializes variables for search paths, output directories, compiler flags, and grist, using d1 ... dn tokens.

TOP is the name of a variable; d1 thru dn are elements of a directory path.

Adds flags to the compiler flags for source files in SubDir's directory.

Adds the path d1/.../dn/ to the header search paths for source files in SubDir's directory. d1 through dn are elements of a directory path.

Reads the Jamfile in $(VAR)/d1/.../dn/.

Copies source into the executable sh(1) script image. Ensures that the first line of the script is $(SHELLHEADER) (default #!/bin/sh).

Adds flags to mark symbols as undefined on link command for images. Images may be referenced unsuffixed; the Undefines rule supplies the suffix.

This rule is called by Object for source files with unknown suffixes, and should be defined in Jamrules with a user-provided rule to handle the source file types not handled by the Object rule. The Jambase UserObject rule merely issues a complaint when it encounters source with files suffixes it does not recognize.

Process the yacc(1) file source.y and renamed the resulting y.tab.c and y.tab.h to source.c. Produces a y.tab.h and renames it to source.h. Called by the Object rule.

There are two kinds of Jam targets: file targets and pseudotargets. File targets are objects that can be found in the filesystem. Pseudotargets are symbolic, and usually represent other targets. Most Jambase rules that define file targets also define pseudotargets which are dependent on types of file targets. The Jambase pseudotargets are:

In addition, Jambase makes the jam default target "all" depend on "exe", "lib", "obj", "files", and "shell".

Most of the following variables have default values for each platform; refer to the Jambase file to see what those defaults are.

ALL_LOCATE_TARGET

Alternative location of built targets. By default, Jambase rules locate built targets in the source tree. By setting $(ALL_LOCATE_TARGET) in Jamrules, you can cause jam to write built targets to a location outside the source tree.

The archive command used to update Library and LibraryFromObjects targets.

The assembler for As rule targets.

Flags handed to the assembler for As.

The name of awk interpreter, used when copying a shell script for the Shell rule.

Selects Borland compile and link actions on NT.

Not longer used. (I.e., used only for backward compatibility with the obsolete INSTALLBIN rule.)

C compiler used for Cc rule targets.

Compile flags for Cc rule targets. The Cc rule sets target-specific $(CCFLAGS) values on its targets.

C++ compiler used for C++ rule targets.

Compile flags for C++ rule targets. The C++ rule sets target-specific $(C++FLAGS) values on its targets.

Program (usually chmod(1)) used to set file permissions for Chmod rule.

The file copy program, used by File and Install* rules.

If set, causes the Library rule to invoke the CreLib rule on the target library before attempting to archive any members, so that the library can be created if needed.

On Macintosh, the root of the Code Warrior Pro 5 directory.

Preprocessor symbol definitions for Cc and C++ rule targets. The Cc and C++ rules set target-specific $(CCDEFS) values on their targets, based on $(DEFINES). (The "indirection" here is required to support compilers, like VMS, with baroque command line syntax for setting symbols).

The operating system-specific name for the current directory.

The operating system-specific name for the parent directory.

Permissions for executables linked with Link, Main, and MainFromObjects, on platforms with a Chmod action.

Permissions for files copied by File or Bulk, on platforms with a Chmod action.

The Fortran compiler used by Fortran rule.

Fortran compiler flags for Fortran rule targets.

(Unix only.) The group owner for Install* rule targets.

If set, used by the HdrRule to distinguish header files with the same name in diffrent directories.

A regular expression pattern that matches C preprocessor "#include" directives in source files and returns the name of the included file.

Name of the rule to invoke with the results of header file scanning. Default is "HdrRule".

This is a jam-special variable. If both HDRRULE and HDRSCAN are set on a target, that target will be scanned for lines matching $(HDRSCAN), and $(HDDRULE) will be invoked on included files found in the matching $(HDRSCAN) lines.

Directories to be searched for header files. This is used by the Object rule to:

• set up search paths for finding files returned by header scans
• add -I flags on compile commands

(See STDHDRS.)

Regular expression pattern to use for header file scanning. The Object rule sets this to $(HDRPATTERN). This is a jam-special variable; see HDRRULE.

Used by the HdrRule to fix the list of directories where header files can be found for a given source file.

Used by the Install* rules to grist paths to installed files; defaults to "installed".

Contains the list of targets specified on the command-line for jam to build. These can be changed from within the Jamfile to change the targets that are built.

Default is "Jamfile"; the name of the user-written rules file found in each source directory.

Default is "Jamrules"; the name of a rule definition file to be read in at the first SubDir rule invocation.

If set, tells the LibraryFromObjects rule not to delete object files once they are archived.

The lex(1) command and flags.

Not longer used. (I.e., used only for backward compatibility with the obsolete INSTALLLIB rule.)

The linker. Defaults to $(CC).

Flags handed to the linker. Defaults to $(CCFLAGS).

List of external libraries to link with. The target image does not depend on these libraries.

The hard link command for HardLink rule.

Used to set the location of generated source files. The Yacc, Lex, and GenFile rules set LOCATE on their targets to $(LOCATE_SOURCE). $(LOCATE_SOURCE) is initialized by the SubDir rule to the source directory itself. (Also, see ALL_LOCATE_TARGET.)

Used to set the location of built binary targets. The Object rule, and hence the Main and Library rules, set LOCATE on their targets to $(LOCATE_TARGET). $(LOCATE_TARGET) is initialized by the SubDir rule to the source directory itself. (See ALL_LOCATE_TARGET.)

Not longer used. (I.e., used only for backward compatibility with the obsolete INSTALLMAN rule.)

The 'create directory' command used for the MkDir rule.

The target-specific file mode (permissions) for targets of the Shell, Setuid, Link, and Install* rules. Used by the Chmod action; hence relevant to NT and VMS only.

Selects Microsoft Visual C 16-bit compile & link actions on NT.

Selects Microsoft Visual C NT 5.0 and earlier compile & link actions on NT.

Selects Microsoft Visual C NT 6.0 and later compile & link actions on NT. These are identical to versions 5.0 and earlier -- it just seems Microsoft changed the name of the variable.

The file rename command and options.

The list of libraries used when linking an executable. Used by the Link rule.

If set, indicates that library members' timestamps can't be found, and prevents the individual objects from being deleted, so that their timestamps can be used instead.

If set, indicates that libraries can't be updated, but only created whole.

The C compiler flag for optimization, used by Cc and C++ rules.

The concatenation of $(OS)$(OSVER)$(OSPLAT), used when jam builds itself to determine the target binary directory. $(OS) and $(OSPLAT) are determined by jam at its compile time (in jam.h). $(OSVER) can optionally be set by the user.

The owner of installed files. Used by Install* rules.

The name of the ranlib command. If set, causes the Ranlib action to be applied after the Archive action to targets of the Library rule.

If set, tells the Cc rule to move the output object file to its target directory because the cc command has a broken -o option.

The command and options to remove a file.

The directory to find sources listed with Main, Library, Object, Bulk, File, Shell, InstallBin, InstallLib, and InstallMan rules. This works by setting the jam-special variable SEARCH to the value of $(SEARCH_SOURCE) for each of the rules' sources. The SubDir rule initializes SEARCH_SOURCE for each directory.

A string inserted to the first line of every file created by the Shell rule.

Permissions for files installed by Shell rule.

Set by the SubDir to a value derived from the directory name, and used by Objects and related rules as 'grist' to perturb file names.

Directories where headers can be found without resorting to using the flag to the C compiler. The $(STDHDRS) directories are used to find headers during scanning, but are not passed to the compiler commands as -I paths.

The path from the current directory to the directory last named by the SubDir rule.

The path from the current directory to the directory that has the Jamrules file. Used by the SubDir rule.

The suffix for executable files, if none provided. Used by the Main rule.

The suffix for libraries. Used by the Library and related rules.

The suffix for object files. Used by the Objects and related rules.

The flag prefixed to each symbol for the Undefines rule (i.e., the compiler flag for undefined symbols).

Selects Watcom compile and link actions on OS2.

The yacc(1) command.

The base filename generated by yacc(1).

The yacc(1) command flags.

The suffix used on generated yacc(1) output.

Copyright 1993-2002 Christopher Seiwald and Perforce Software, Inc.
Comments to info@perforce.com
Last updated: Dec 31, 2000
$Id: //public/jam/src/Jambase.html#10 $