Haiku/buildtools
1
0
Fork 0
mirror of https://review.haiku-os.org/buildtools synced 2025-02-19 12:17:55 +01:00
Code Issues Actions Packages Projects Releases Wiki Activity
buildtools/gcc/mpc/doc/mpc.info
Jérôme Duval 3c24538123 Adding inline mpc directory so the MPC library is built as part of GCC 4.5 
git-svn-id: file:///srv/svn/repos/haiku/buildtools/trunk@42242 a95241bf-73f2-0310-859d-f6bbb57e9c96
2011-06-19 13:22:38 +00:00

1323 lines
60 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

This is mpc.info, produced by makeinfo version 4.13 from mpc.texi.
START-INFO-DIR-ENTRY
* mpc: (mpc.info). Multiple Precision Complex Library.
END-INFO-DIR-ENTRY
This is the manual for MPC, a library for multiple precision complex
arithmetic, version 0.9, of February 2011.
Copyright (C) 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
2011 INRIA
Permission is granted to make and distribute verbatim copies of this
manual provided the copyright notice and this permission notice are
preserved on all copies.
Permission is granted to copy and distribute modified versions of
this manual under the conditions for verbatim copying, provided that
the entire resulting derived work is distributed under the terms of a
permission notice identical to this one.
Permission is granted to copy and distribute translations of this
manual into another language, under the above conditions for modified
versions.

File: mpc.info, Node: Top, Next: Copying, Prev: (dir), Up: (dir)
MPC
***
This manual documents how to install and use the Multiple Precision
Complex Library, version 0.9
* Menu:
* Copying:: MPC Copying Conditions (LGPL).
* Introduction to MPC:: Brief introduction to MPC.
* Installing MPC:: How to configure and compile the MPC library.
* Reporting Bugs:: How to usefully report bugs.
* MPC Basics:: What every MPC user should know.
* Complex Functions:: Functions for arithmetic on complex numbers.
* Contributors::
* References::
* Concept Index::
* Function Index::

File: mpc.info, Node: Copying, Next: Introduction to MPC, Prev: Top, Up: Top
MPC Copying Conditions
**********************
The MPC Library is free software; you can redistribute it and/or modify
it under the terms of the GNU Lesser General Public License as
published by the Free Software Foundation; either version 2.1 of the
License, or (at your option) any later version, see the file
COPYING.LIB.
The MPC Library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.

File: mpc.info, Node: Introduction to MPC, Next: Installing MPC, Prev: Copying, Up: Top
1 Introduction to MPC
*********************
MPC is a portable library written in C for arbitrary precision
arithmetic on complex numbers providing correct rounding. Ultimately, it
should implement a multiprecision equivalent of the C99 standard. It
builds upon the GNU MP and the GNU MPFR libraries.
1.1 How to use this Manual
==========================
Everyone should read *note MPC Basics::. If you need to install the
library yourself, you need to read *note Installing MPC::, too.
The remainder of the manual can be used for later reference,
although it is probably a good idea to skim through it.

File: mpc.info, Node: Installing MPC, Next: Reporting Bugs, Prev: Introduction to MPC, Up: Top
2 Installing MPC
****************
To build MPC, you first have to install GNU MP (version 4.3.2 or
higher) and GNU MPFR (version 2.4.2 or higher) on your computer. You
need a C compiler, preferably GCC, but any reasonable compiler should
work. And you need a standard Unix `make' program, plus some other
standard Unix utility programs.
Here are the steps needed to install the library on Unix systems:
1. `tar xzf mpc-0.9.tar.gz'
2. `cd mpc-0.9'
3. `./configure'
if GMP and MPFR are installed into standard directories, that is,
directories that are searched by default by the compiler and the
linking tools.
`./configure --with-gmp=<gmp_install_dir>'
is used to indicate a different location where GMP is installed.
Alternatively, you can specify directly GMP include and GMP lib
directories with `./configure --with-gmp-lib=<gmp_lib_dir>
--with-gmp-include=<gmp_include_dir>'.
`./configure --with-mpfr=<mpfr_install_dir>'
is used to indicate a different location where MPFR is installed.
Alternatively, you can specify directly MPFR include and MPFR lib
directories with `./configure --with-mpf-lib=<mpfr_lib_dir>
--with-mpfr-include=<mpfr_include_dir>'.
Another useful parameter is `--prefix', which can be used to
specify an alternative installation location instead of
`/usr/local'; see `make install' below.
If for debugging purposes you wish to log calls to MPC functions
from within your code, add the parameter `--enable-logging'. In
your code, replace the inclusion of `mpc.h' by `mpc-log.h' and
link the executable dynamically. Then all calls to functions with
only complex arguments are printed to `stderr' in the following
form: First, the function name is given, followed by its type such
as `c_cc', meaning that the function has one complex result (one
`c' in front of the `_'), computed from two complex arguments (two
`c' after the `_'). Then, the precisions of the real and the
imaginary part of the first result is given, followed by the
second one and so on. Finally, for each argument, the precisions
of its real and imaginary part are specified and the argument
itself is printed in hexadecimal via the function `mpc_out_str'
(*note String and Stream Input and Output: string-io.).
Use `./configure --help' for an exhaustive list of parameters.
4. `make'
This compiles MPC in the working directory.
5. `make check'
This will make sure MPC was built correctly.
If you get error messages, please report them to
`mpc-discuss@lists.gforge.inria.fr' (*Note Reporting Bugs::, for
information on what to include in useful bug reports).
6. `make install'
This will copy the file `mpc.h' to the directory
`/usr/local/include', the file `libmpc.a' to the directory
`/usr/local/lib', and the file `mpc.info' to the directory
`/usr/local/share/info' (or if you passed the `--prefix' option to
`configure', using the prefix directory given as argument to
`--prefix' instead of `/usr/local'). Note: you need write
permissions on these directories.
2.1 Other `make' Targets
========================
There are some other useful make targets:
* `info'
Create an info version of the manual, in `mpc.info'.
* `pdf'
Create a PDF version of the manual, in `doc/mpc.pdf'.
* `dvi'
Create a DVI version of the manual, in `doc/mpc.dvi'.
* `ps'
Create a Postscript version of the manual, in `doc/mpc.ps'.
* `html'
Create an HTML version of the manual, in several pages in the
directory `doc/mpc.html'; if you want only one output HTML file,
then type `makeinfo --html --no-split mpc.texi' instead.
* `clean'
Delete all object files and archive files, but not the
configuration files.
* `distclean'
Delete all files not included in the distribution.
* `uninstall'
Delete all files copied by `make install'.
2.2 Known Build Problems
========================
On AIX, if GMP was built with the 64-bit ABI, before building and
testing MPC, it might be necessary to set the `OBJECT_MODE' environment
variable to 64 by, e.g.,
`export OBJECT_MODE=64'
This has been tested with the C compiler IBM XL C/C++ Enterprise
Edition V8.0 for AIX, version: 08.00.0000.0021, GMP 4.2.4 and MPFR
2.4.1.
Please report any other problems you encounter to
`mpc-discuss@lists.gforge.inria.fr'. *Note Reporting Bugs::.

File: mpc.info, Node: Reporting Bugs, Next: MPC Basics, Prev: Installing MPC, Up: Top
3 Reporting Bugs
****************
If you think you have found a bug in the MPC library, please investigate
and report it. We have made this library available to you, and it is
not to ask too much from you, to ask you to report the bugs that you
find.
There are a few things you should think about when you put your bug
report together.
You have to send us a test case that makes it possible for us to
reproduce the bug. Include instructions on how to run the test case.
You also have to explain what is wrong; if you get a crash, or if
the results printed are incorrect and in that case, in what way.
Please include compiler version information in your bug report.
This can be extracted using `gcc -v', or `cc -V' on some machines.
Also, include the output from `uname -a'.
If your bug report is good, we will do our best to help you to get a
corrected version of the library; if the bug report is poor, we will
not do anything about it (aside of chiding you to send better bug
reports).
Send your bug report to: `mpc-discuss@lists.gforge.inria.fr'.
If you think something in this manual is unclear, or downright
incorrect, or if the language needs to be improved, please send a note
to the same address.

File: mpc.info, Node: MPC Basics, Next: Complex Functions, Prev: Reporting Bugs, Up: Top
4 MPC Basics
************
All declarations needed to use MPC are collected in the include file
`mpc.h'. It is designed to work with both C and C++ compilers. You
should include that file in any program using the MPC library by adding
the line
#include "mpc.h"
4.1 Nomenclature and Types
==========================
"Complex number" or "Complex" for short, is a pair of two arbitrary
precision floating-point numbers (for the real and imaginary parts).
The C data type for such objects is `mpc_t'.
The "Precision" is the number of bits used to represent the mantissa of
the real and imaginary parts; the corresponding C data type is
`mpfr_prec_t'. For more details on the allowed precision range, *note
Nomenclature and Types: (mpfr.info)Nomenclature and Types.
The "rounding mode" specifies the way to round the result of a complex
operation, in case the exact result can not be represented exactly in
the destination mantissa; the corresponding C data type is `mpc_rnd_t'.
A complex rounding mode is a pair of two rounding modes: one for the
real part, one for the imaginary part.
4.2 Function Classes
====================
There is only one class of functions in the MPC library, namely
functions for complex arithmetic. The function names begin with `mpc_'.
The associated type is `mpc_t'.
4.3 MPC Variable Conventions
============================
As a general rule, all MPC functions expect output arguments before
input arguments. This notation is based on an analogy with the
assignment operator.
MPC allows you to use the same variable for both input and output in
the same expression. For example, the main function for floating-point
multiplication, `mpc_mul', can be used like this: `mpc_mul (x, x, x,
rnd_mode)'. This computes the square of X with rounding mode `rnd_mode'
and puts the result back in X.
Before you can assign to an MPC variable, you need to initialize it
by calling one of the special initialization functions. When you are
done with a variable, you need to clear it out, using one of the
functions for that purpose.
A variable should only be initialized once, or at least cleared out
between each initialization. After a variable has been initialized, it
may be assigned to any number of times.
For efficiency reasons, avoid to initialize and clear out a variable
in loops. Instead, initialize it before entering the loop, and clear
it out after the loop has exited.
You do not need to be concerned about allocating additional space
for MPC variables, since each of its real and imaginary part has a
mantissa of fixed size. Hence unless you change its precision, or
clear and reinitialize it, a complex variable will have the same
allocated space during all its life.
4.4 Rounding Modes
==================
A complex rounding mode is of the form `MPC_RNDxy' where `x' and `y'
are one of `N' (to nearest), `Z' (towards zero), `U' (towards plus
infinity), `D' (towards minus infinity). The first letter refers to
the rounding mode for the real part, and the second one for the
imaginary part. For example `MPC_RNDZU' indicates to round the real
part towards zero, and the imaginary part towards plus infinity.
The `round to nearest' mode works as in the IEEE P754 standard: in
case the number to be rounded lies exactly in the middle of two
representable numbers, it is rounded to the one with the least
significant bit set to zero. For example, the number 5, which is
represented by (101) in binary, is rounded to (100)=4 with a precision
of two bits, and not to (110)=6.
4.5 Return Value
================
Most MPC functions have a return value of type `int', which is used to
indicate the position of the rounded real and imaginary parts with
respect to the exact (infinite precision) values. If this integer is
`i', the macros `MPC_INEX_RE(i)' and `MPC_INEX_IM(i)' give 0 if the
corresponding rounded value is exact, a negative value if the rounded
value is less than the exact one, and a positive value if it is greater
than the exact one. Similarly, functions computing a result of type
`mpfr_t' return an integer that is 0, positive or negative depending on
whether the rounded value is the same, larger or smaller then the exact
result.
Some functions, such as `mpc_sin_cos', compute two complex results;
the macros `MPC_INEX1(i)' and `MPC_INEX2(i)', applied to the return
value `i' of such a function, yield the exactness value corresponding
to the first or the second computed value, respectively.
4.6 Branch Cuts And Special Values
==================================
Some complex functions have branch cuts, across which the function is
discontinous. In MPC, the branch cuts chosen are the same as those
specified for the corresponding functions in the ISO C99 standard.
Likewise, when evaluated at a point whose real or imaginary part is
either infinite or a NaN or a signed zero, a function returns the same
value as those specified for the corresponding function in the ISO C99
standard.

File: mpc.info, Node: Complex Functions, Next: Contributors, Prev: MPC Basics, Up: Top
5 Complex Functions
*******************
The complex functions expect arguments of type `mpc_t'.
The MPC floating-point functions have an interface that is similar
to the GNU MP integer functions. The function prefix for operations on
complex numbers is `mpc_'.
The precision of a computation is defined as follows: Compute the
requested operation exactly (with "infinite precision"), and round the
result to the destination variable precision with the given rounding
mode.
The MPC complex functions are intended to be a smooth extension of
the IEEE P754 arithmetic. The results obtained on one computer should
not differ from the results obtained on a computer with a different
word size.
* Menu:
* Initializing Complex Numbers::
* Assigning Complex Numbers::
* Converting Complex Numbers::
* String and Stream Input and Output::
* Complex Comparison::
* Projection & Decomposing::
* Basic Arithmetic::
* Power Functions and Logarithm::
* Trigonometric Functions::
* Miscellaneous Complex Functions::
* Advanced Functions::
* Internals::

File: mpc.info, Node: Initializing Complex Numbers, Next: Assigning Complex Numbers, Prev: Complex Functions, Up: Complex Functions
5.1 Initialization Functions
============================
An `mpc_t' object must be initialized before storing the first value in
it. The functions `mpc_init2' and `mpc_init3' are used for that
purpose.
-- Function: void mpc_init2 (mpc_t Z, mpfr_prec_t PREC)
Initialize Z to precision PREC bits and set its real and imaginary
parts to NaN. Normally, a variable should be initialized once only
or at least be cleared, using `mpc_clear', between initializations.
-- Function: void mpc_init3 (mpc_t Z, mpfr_prec_t PREC_R, mpfr_prec_t
PREC_I)
Initialize Z with the precision of its real part being PREC_R bits
and the precision of its imaginary part being PREC_I bits, and set
the real and imaginary parts to NaN.
-- Function: void mpc_clear (mpc_t Z)
Free the space occupied by Z. Make sure to call this function for
all `mpc_t' variables when you are done with them.
Here is an example on how to initialize complex variables:
{
mpc_t x, y;
mpc_init2 (x, 256); /* precision _exactly_ 256 bits */
mpc_init3 (y, 100, 50); /* 100/50 bits for the real/imaginary part */
...
mpc_clear (x);
mpc_clear (y);
}
The following function is useful for changing the precision during a
calculation. A typical use would be for adjusting the precision
gradually in iterative algorithms like Newton-Raphson, making the
computation precision closely match the actual accurate part of the
numbers.
-- Function: void mpc_set_prec (mpc_t X, mpfr_prec_t PREC)
Reset the precision of X to be *exactly* PREC bits, and set its
real/imaginary parts to NaN. The previous value stored in X is
lost. It is equivalent to a call to `mpc_clear(x)' followed by a
call to `mpc_init2(x, prec)', but more efficient as no allocation
is done in case the current allocated space for the mantissa of X
is sufficient.
-- Function: mpfr_prec_t mpc_get_prec (mpc_t X)
If the real and imaginary part of X have the same precision, it is
returned, otherwise, 0 is returned.
-- Function: void mpc_get_prec2 (mpfr_prec_t* PR, mpfr_prec_t* PI,
mpc_t X)
Returns the precision of the real part of X via PR and of its
imaginary part via PI.

File: mpc.info, Node: Assigning Complex Numbers, Next: Converting Complex Numbers, Prev: Initializing Complex Numbers, Up: Complex Functions
5.2 Assignment Functions
========================
These functions assign new values to already initialized complex numbers
(*note Initializing Complex Numbers::). When using any functions with
`intmax_t' or `uintmax_t' parameters, you must include `<stdint.h>' or
`<inttypes.h>' _before_ `mpc.h', to allow `mpc.h' to define prototypes
for these functions. Similarly, functions with parameters of type
`complex' or `long complex' are defined only if `<complex.h>' is
included _before_ `mpc.h'. If you need assignment functions that are
not in the current API, you can define them using the `MPC_SET_X_Y'
macro (*note Advanced Functions::).
-- Function: int mpc_set (mpc_t ROP, mpc_t OP, mpc_rnd_t RND)
Set the value of ROP from OP, rounded to the precision of ROP with
the given rounding mode RND.
-- Function: int mpc_set_ui (mpc_t ROP, unsigned long int OP,
mpc_rnd_t RND)
-- Function: int mpc_set_si (mpc_t ROP, long int OP, mpc_rnd_t RND)
-- Function: int mpc_set_uj (mpc_t ROP, uintmax_t OP, mpc_rnd_t RND)
-- Function: int mpc_set_sj (mpc_t ROP, intmax_t OP, mpc_rnd_t RND)
-- Function: int mpc_set_d (mpc_t ROP, double OP, mpc_rnd_t RND)
-- Function: int mpc_set_ld (mpc_t ROP, long double OP, mpc_rnd_t RND)
-- Function: int mpc_set_dc (mpc_t ROP, double _Complex OP, mpc_rnd_t
RND)
-- Function: int mpc_set_ldc (mpc_t ROP, long double _Complex OP,
mpc_rnd_t RND)
-- Function: int mpc_set_z (mpc_t ROP, mpz_t OP mpc_rnd_t RND)
-- Function: int mpc_set_q (mpc_t ROP, mpq_t OP mpc_rnd_t RND)
-- Function: int mpc_set_f (mpc_t ROP, mpf_t OP mpc_rnd_t RND)
-- Function: int mpc_set_fr (mpc_t ROP, mpfr_t OP, mpc_rnd_t RND)
Set the value of ROP from OP, rounded to the precision of ROP with
the given rounding mode RND. The argument OP is interpreted as
real, so the imaginary part of ROP is set to zero with a positive
sign. Please note that even a `long int' may have to be rounded,
if the destination precision is less than the machine word width.
For `mpc_set_d', be careful that the input number OP may not be
exactly representable as a double-precision number (this happens
for 0.1 for instance), in which case it is first rounded by the C
compiler to a double-precision number, and then only to a complex
number.
-- Function: int mpc_set_ui_ui (mpc_t ROP, unsigned long int OP1,
unsigned long int OP2, mpc_rnd_t RND)
-- Function: int mpc_set_si_si (mpc_t ROP, long int OP1, long int OP2,
mpc_rnd_t RND)
-- Function: int mpc_set_uj_uj (mpc_t ROP, uintmax_t OP1, uintmax_t
OP2, mpc_rnd_t RND)
-- Function: int mpc_set_sj_sj (mpc_t ROP, intmax_t OP1, intmax_t OP2,
mpc_rnd_t RND)
-- Function: int mpc_set_d_d (mpc_t ROP, double OP1, double OP2,
mpc_rnd_t RND)
-- Function: int mpc_set_ld_ld (mpc_t ROP, long double OP1, long
double OP2, mpc_rnd_t RND)
-- Function: int mpc_set_z_z (mpc_t ROP, mpz_t OP1, mpz_t OP2,
mpc_rnd_t RND)
-- Function: int mpc_set_q_q (mpc_t ROP, mpq_t OP1, mpq_t OP2,
mpc_rnd_t RND)
-- Function: int mpc_set_f_f (mpc_t ROP, mpf_t OP1, mpf_t OP2,
mpc_rnd_t RND)
-- Function: int mpc_set_fr_fr (mpc_t ROP, mpfr_t OP1, mpfr_t OP2,
mpc_rnd_t RND)
Set the real part of ROP from OP1, and its imaginary part from
OP2, according to the rounding mode RND.
Beware that the behaviour of `mpc_set_fr_fr' is undefined if OP1
or OP2 is a pointer to the real or imaginary part of ROP. To
exchange the real and the imaginary part of a complex number,
either use `mpfr_swap (mpc_realref (rop), mpc_imagref (rop))',
which also exchanges the precisions of the two parts; or use a
temporary variable.
For functions assigning complex variables from strings or input
streams, *note String and Stream Input and Output: string-io.
-- Function: void mpc_set_nan (mpc_t ROP)
Set ROP to Nan+i*NaN.
-- Function: void mpc_swap (mpc_t OP1, mpc_t OP2)
Swap the values of OP1 and OP2 efficiently. Warning: The
precisions are exchanged, too; in case these are different,
`mpc_swap' is thus not equivalent to three `mpc_set' calls using a
third auxiliary variable.

File: mpc.info, Node: Converting Complex Numbers, Next: String and Stream Input and Output, Prev: Assigning Complex Numbers, Up: Complex Functions
5.3 Conversion Functions
========================
The following functions are available only if `<complex.h>' is included
_before_ `mpc.h'.
-- Function: double _Complex mpc_get_dc (mpc_t OP, mpc_rnd_t RND)
-- Function: long double _Complex mpc_get_ldc (mpc_t OP, mpc_rnd_t RND)
Convert OP to a C complex number, using the rounding mode RND.
For functions converting complex variables to strings or stream
output, *note String and Stream Input and Output: string-io.

File: mpc.info, Node: String and Stream Input and Output, Next: Complex Comparison, Prev: Converting Complex Numbers, Up: Complex Functions
5.4 String and Stream Input and Output
======================================
-- Function: int mpc_strtoc (mpc_t ROP, const char *NPTR, char
**ENDPTR, int BASE, mpc_rnd_t RND)
Read a complex number from a string NPTR in base BASE, rounded to
the precision of ROP with the given rounding mode RND. The BASE
must be either 0 or a number from 2 to 36 (otherwise the behaviour
is undefined). If NPTR starts with valid data, the result is
stored in ROP, the usual inexact value is returned (*note Return
Value: return-value.) and, if ENDPTR is not the null pointer,
*ENDPTR points to the character just after the valid data.
Otherwise, ROP is set to `NaN + i * NaN', -1 is returned and, if
ENDPTR is not the null pointer, the value of NPTR is stored in the
location referenced by ENDPTR.
The expected form of a complex number string is either a real
number (an optional leading whitespace, an optional sign followed
by a floating-point number), or a pair of real numbers in
parentheses separated by whitespace. If a real number is read, the
missing imaginary part is set to +0. The form of a floating-point
number depends on the base and is described in the documentation
of `mpfr_strtofr' (*note Assignment Functions:
(mpfr.info)Assignment Functions.). For instance, `"3.1415926"',
`"(1.25e+7 +.17)"', `"(@nan@ 2)"' and `"(-0 -7)"' are valid
strings for BASE = 10. If BASE = 0, then a prefix may be used to
indicate the base in which the floating-point number is written.
Use prefix '0b' for binary numbers, prefix '0x' for hexadecimal
numbers, and no prefix for decimal numbers. The real and
imaginary part may then be written in different bases. For
instance, `"(1.024e+3 +2.05e+3)"' and `"(0b1p+10 +0x802)"' are
valid strings for `base'=0 and represent the same value.
-- Function: int mpc_set_str (mpc_t ROP, const char *S, int BASE,
mpc_rnd_t rnd)
Set ROP to the value of the string S in base BASE, rounded to the
precision of ROP with the given rounding mode RND. See the
documentation of `mpc_strtoc' for a detailed description of the
valid string formats. Contrarily to `mpc_strtoc', `mpc_set_str'
requires the _whole_ string to represent a valid complex number
(potentially followed by additional white space). This function
returns the usual inexact value (*note Return Value:
return-value.) if the entire string up to the final null character
is a valid number in base BASE; otherwise it returns -1, and ROP
is set to NaN+i*NaN.
-- Function: char * mpc_get_str (int B, size_t N, mpc_t OP, mpc_rnd_t
RND)
Convert OP to a string containing its real and imaginary parts,
separated by a space and enclosed in a pair of parentheses. The
numbers are written in base B (which may vary from 2 to 36) and
rounded according to RND. The number of significant digits, at
least 2, is given by N. It is also possible to let N be zero, in
which case the number of digits is chosen large enough so that
re-reading the printed value with the same precision, assuming
both output and input use rounding to nearest, will recover the
original value of OP. Note that `mpc_get_str' uses the decimal
point of the current locale if available, and `.' otherwise.
The string is generated using the current memory allocation
function (`malloc' by default, unless it has been modified using
the custom memory allocation interface of `gmp'); once it is not
needed any more, it should be freed by calling `mpc_free_str'.
-- Function: void mpc_free_str (char *STR)
Free the string STR, which needs to have been allocated by a call
to `mpc_get_str'.
The following two functions read numbers from input streams and write
them to output streams. When using any of these functions, you need to
include `stdio.h' _before_ `mpc.h'.
-- Function: int mpc_inp_str (mpc_t ROP, FILE *STREAM, size_t *READ,
int BASE, mpc_rnd_t RND)
Input a string in base BASE in the same format as for `mpc_strtoc'
from stdio stream STREAM, rounded according to RND, and put the
read complex number into ROP. If STREAM is the null pointer, ROP
is read from `stdin'. Return the usual inexact value; if an error
occurs, set ROP to `NaN + i * NaN' and return -1. If READ is not
the null pointer, it is set to the number of read characters.
Unlike `mpc_strtoc', the function `mpc_inp_str' does not possess
perfect knowledge of the string to transform and has to read it
character by character, so it behaves slightly differently: It
tries to read a string describing a complex number and processes
this string through a call to `mpc_set_str'. Precisely, after
skipping optional whitespace, a minimal string is read according
to the regular expression `mpfr | '(' \s* mpfr \s+ mpfr \s* ')'',
where `\s' denotes a whitespace, and `mpfr' is either a string
containing neither whitespaces nor parentheses, or
`nan(n-char-sequence)' or `@nan@(n-char-sequence)' (regardless of
capitalisation) with `n-char-sequence' a string of ascii letters,
digits or `'_''.
For instance, upon input of `"nan(13 1)"', the function
`mpc_inp_str' starts to recognise a value of NaN followed by an
n-char-sequence indicated by the opening parenthesis; as soon as
the space is reached, it becocmes clear that the expression in
parentheses is not an n-char-sequence, and the error flag -1 is
returned after 6 characters have been consumed from the stream
(the whitespace itself remaining in the stream). The function
`mpc_strtoc', on the other hand, may track back when reaching the
whitespace; it treats the string as the two successive complex
numbers `NaN + i * 0' and `13 + i'. It is thus recommended to
have a whitespace follow each floating point number to avoid this
problem.
-- Function: size_t mpc_out_str (FILE *STREAM, int BASE, size_t
N_DIGITS, mpc_t OP, mpc_rnd_t RND)
Output OP on stdio stream STREAM in base BASE, rounded according
to RND, in the same format as for `mpc_strtoc' If STREAM is the
null pointer, ROP is written to `stdout'.
Return the number of characters written.

File: mpc.info, Node: Complex Comparison, Next: Projection & Decomposing, Prev: String and Stream Input and Output, Up: Complex Functions
5.5 Comparison Functions
========================
-- Function: int mpc_cmp (mpc_t OP1, mpc_t OP2)
-- Function: int mpc_cmp_si_si (mpc_t OP1, long int OP2R, long int
OP2I)
-- Macro: int mpc_cmp_si (mpc_t OP1, long int OP2)
Compare OP1 and OP2, where in the case of `mpc_cmp_si_si', OP2 is
taken to be OP2R + i OP2I. The return value C can be decomposed
into `x = MPC_INEX_RE(c)' and `y = MPC_INEX_IM(c)', such that X is
positive if the real part of OP1 is greater than that of OP2, zero
if both real parts are equal, and negative if the real part of OP1
is less than that of OP2, and likewise for Y. Both OP1 and OP2
are considered to their full own precision, which may differ. It
is not allowed that one of the operands has a NaN (Not-a-Number)
part.
The storage of the return value is such that equality can be
simply checked with `mpc_cmp (op1, op2) == 0'.

File: mpc.info, Node: Projection & Decomposing, Next: Basic Arithmetic, Prev: Complex Comparison, Up: Complex Functions
5.6 Projection and Decomposing Functions
========================================
-- Function: int mpc_real (mpfr_t ROP, mpc_t OP, mpfr_rnd_t RND)
Set ROP to the value of the real part of OP rounded in the
direction RND.
-- Function: int mpc_imag (mpfr_t ROP, mpc_t OP, mpfr_rnd_t RND)
Set ROP to the value of the imaginary part of OP rounded in the
direction RND.
-- Macro: mpfr_t mpc_realref (mpc_t OP)
-- Macro: mpfr_t mpc_imagref (mpc_t OP)
Return a reference to the real part and imaginary part of OP,
respectively. The `mpfr' functions can be used on the result of
these macros (note that the `mpfr_t' type is itself a pointer).
-- Function: int mpc_arg (mpfr_t ROP, mpc_t OP, mpfr_rnd_t RND)
Set ROP to the argument of OP, with a branch cut along the
negative real axis.
-- Function: int mpc_proj (mpc_t ROP, mpc_t OP, mpc_rnd_t RND)
Compute a projection of OP onto the Riemann sphere. Set ROP to OP
rounded in the direction RND, except when at least one part of OP
is infinite (even if the other part is a NaN) in which case the
real part of ROP is set to plus infinity and its imaginary part to
a signed zero with the same sign as the imaginary part of OP.

File: mpc.info, Node: Basic Arithmetic, Next: Power Functions and Logarithm, Prev: Projection & Decomposing, Up: Complex Functions
5.7 Basic Arithmetic Functions
==============================
All the following functions are designed in such a way that, when
working with real numbers instead of complex numbers, their complexity
should essentially be the same as with the MPFR library, with only a
marginal overhead due to the MPC layer.
-- Function: int mpc_add (mpc_t ROP, mpc_t OP1, mpc_t OP2, mpc_rnd_t
RND)
-- Function: int mpc_add_ui (mpc_t ROP, mpc_t OP1, unsigned long int
OP2, mpc_rnd_t RND)
-- Function: int mpc_add_fr (mpc_t ROP, mpc_t OP1, mpfr_t OP2,
mpc_rnd_t RND)
Set ROP to OP1 + OP2 rounded according to RND.
-- Function: int mpc_sub (mpc_t ROP, mpc_t OP1, mpc_t OP2, mpc_rnd_t
RND)
-- Function: int mpc_sub_fr (mpc_t ROP, mpc_t OP1, mpfr_t OP2,
mpc_rnd_t RND)
-- Function: int mpc_fr_sub (mpc_t ROP, mpfr_t OP1, mpc_t OP2,
mpc_rnd_t RND)
-- Function: int mpc_sub_ui (mpc_t ROP, mpc_t OP1, unsigned long int
OP2, mpc_rnd_t RND)
-- Macro: int mpc_ui_sub (mpc_t ROP, unsigned long int OP1, mpc_t OP2,
mpc_rnd_t RND)
-- Function: int mpc_ui_ui_sub (mpc_t ROP, unsigned long int RE1,
unsigned long int IM1, mpc_t OP2, mpc_rnd_t RND)
Set ROP to OP1 - OP2 rounded according to RND. For
`mpc_ui_ui_sub', OP1 is RE1 + IM1.
-- Function: int mpc_mul (mpc_t ROP, mpc_t OP1, mpc_t OP2, mpc_rnd_t
RND)
-- Function: int mpc_mul_ui (mpc_t ROP, mpc_t OP1, unsigned long int
OP2, mpc_rnd_t RND)
-- Function: int mpc_mul_si (mpc_t ROP, mpc_t OP1, long int OP2,
mpc_rnd_t RND)
-- Function: int mpc_mul_fr (mpc_t ROP, mpc_t OP1, mpfr_t OP2,
mpc_rnd_t RND)
Set ROP to OP1 times OP2 rounded according to RND.
-- Function: int mpc_mul_i (mpc_t ROP, mpc_t OP, int SGN, mpc_rnd_t
RND)
Set ROP to OP times the imaginary unit i if SGN is non-negative,
set ROP to OP times -i otherwise, in both cases rounded according
to RND.
-- Function: int mpc_sqr (mpc_t ROP, mpc_t OP, mpc_rnd_t RND)
Set ROP to the square of OP rounded according to RND.
-- Function: int mpc_div (mpc_t ROP, mpc_t OP1, mpc_t OP2, mpc_rnd_t
RND)
-- Function: int mpc_div_ui (mpc_t ROP, mpc_t OP1, unsigned long int
OP2, mpc_rnd_t RND)
-- Function: int mpc_ui_div (mpc_t ROP, unsigned long int OP1, mpc_t
OP2, mpc_rnd_t RND)
-- Function: int mpc_div_fr (mpc_t ROP, mpc_t OP1, mpfr_t OP2,
mpc_rnd_t RND)
-- Function: int mpc_fr_div (mpc_t ROP, mpfr_t OP1, mpc_t OP2,
mpc_rnd_t RND)
Set ROP to OP1/OP2 rounded according to RND. For `mpc_div' and
`mpc_ui_div', the return value may fail to recognize some exact
results. The sign of returned value is significant only for
`mpc_div_ui'.
-- Function: int mpc_neg (mpc_t ROP, mpc_t OP, mpc_rnd_t RND)
Set ROP to -OP rounded according to RND. Just changes the sign if
ROP and OP are the same variable.
-- Function: int mpc_conj (mpc_t ROP, mpc_t OP, mpc_rnd_t RND)
Set ROP to the conjugate of OP rounded according to RND. Just
changes the sign of the imaginary part if ROP and OP are the same
variable.
-- Function: int mpc_abs (mpfr_t ROP, mpc_t OP, mpfr_rnd_t RND)
Set the floating-point number ROP to the absolute value of OP,
rounded in the direction RND. The returned value is zero iff the
result is exact.
-- Function: int mpc_norm (mpfr_t ROP, mpc_t OP, mpfr_rnd_t RND)
Set the floating-point number ROP to the norm of OP (i.e., the
square of its absolute value), rounded in the direction RND. The
returned value is zero iff the result is exact. Note that the
destination is of type `mpfr_t', not `mpc_t'.
-- Function: int mpc_mul_2exp (mpc_t ROP, mpc_t OP1, unsigned long int
OP2, mpc_rnd_t RND)
Set ROP to OP1 times 2 raised to OP2 rounded according to RND.
Just increases the exponents of the real and imaginary parts by OP2
when ROP and OP1 are identical.
-- Function: int mpc_div_2exp (mpc_t ROP, mpc_t OP1, unsigned long int
OP2, mpc_rnd_t RND)
Set ROP to OP1 divided by 2 raised to OP2 rounded according to
RND. Just decreases the exponents of the real and imaginary parts
by OP2 when ROP and OP1 are identical.
-- Function: int mpc_fma (mpc_t ROP, mpc_t OP1, mpc_t OP2, mpc_t OP3,
mpc_rnd_t RND)
Set ROP to OP1 times OP2 plus OP3, rounded according to RND, with
only one final rounding.

File: mpc.info, Node: Power Functions and Logarithm, Next: Trigonometric Functions, Prev: Basic Arithmetic, Up: Complex Functions
5.8 Power Functions and Logarithm
=================================
-- Function: int mpc_sqrt (mpc_t ROP, mpc_t OP, mpc_rnd_t RND)
Set ROP to the square root of OP rounded according to RND.
-- Function: int mpc_pow (mpc_t ROP, mpc_t OP1, mpc_t OP2, mpc_rnd_t
RND)
-- Function: int mpc_pow_d (mpc_t ROP, mpc_t OP1, double OP2,
mpc_rnd_t RND)
-- Function: int mpc_pow_ld (mpc_t ROP, mpc_t OP1, long double OP2,
mpc_rnd_t RND)
-- Function: int mpc_pow_si (mpc_t ROP, mpc_t OP1, long OP2, mpc_rnd_t
RND)
-- Function: int mpc_pow_ui (mpc_t ROP, mpc_t OP1, unsigned long OP2,
mpc_rnd_t RND)
-- Function: int mpc_pow_z (mpc_t ROP, mpc_t OP1, mpz_t OP2, mpc_rnd_t
RND)
-- Function: int mpc_pow_fr (mpc_t ROP, mpc_t OP1, mpfr_t OP2,
mpc_rnd_t RND)
Set ROP to OP1 raised to the power OP2, rounded according to RND.
For `mpc_pow_d', `mpc_pow_ld', `mpc_pow_si', `mpc_pow_ui',
`mpc_pow_z' and `mpc_pow_fr', the imaginary part of OP2 is
considered as +0.
-- Function: int mpc_exp (mpc_t ROP, mpc_t OP, mpc_rnd_t RND)
Set ROP to the exponential of OP, rounded according to RND with
the precision of ROP.
-- Function: int mpc_log (mpc_t ROP, mpc_t OP, mpc_rnd_t RND)
Set ROP to the logarithm of OP, rounded according to RND with the
precision of ROP. The principal branch is chosen, with the branch
cut on the negative real axis, so that the imaginary part of the
result lies in ]-\pi , \pi].

File: mpc.info, Node: Trigonometric Functions, Next: Miscellaneous Complex Functions, Prev: Power Functions and Logarithm, Up: Complex Functions
5.9 Trigonometric Functions
===========================
-- Function: int mpc_sin (mpc_t ROP, mpc_t OP, mpc_rnd_t RND)
Set ROP to the sine of OP, rounded according to RND with the
precision of ROP.
-- Function: int mpc_cos (mpc_t ROP, mpc_t OP, mpc_rnd_t RND)
Set ROP to the cosine of OP, rounded according to RND with the
precision of ROP.
-- Function: int mpc_sin_cos (mpc_t ROP_SIN, mpc_t ROP_COS, mpc_t OP,
mpc_rnd_t RND_SIN, mpc_rnd_t RND_COS)
Set ROP_SIN to the sine of OP, rounded according to RND_SIN with
the precision of ROP_SIN, and ROP_COS to the cosine of OP, rounded
according to RND_COS with the precision of ROP_COS.
-- Function: int mpc_tan (mpc_t ROP, mpc_t OP, mpc_rnd_t RND)
Set ROP to the tangent of OP, rounded according to RND with the
precision of ROP.
-- Function: int mpc_sinh (mpc_t ROP, mpc_t OP, mpc_rnd_t RND)
Set ROP to the hyperbolic sine of OP, rounded according to RND
with the precision of ROP.
-- Function: int mpc_cosh (mpc_t ROP, mpc_t OP, mpc_rnd_t RND)
Set ROP to the hyperbolic cosine of OP, rounded according to RND
with the precision of ROP.
-- Function: int mpc_tanh (mpc_t ROP, mpc_t OP, mpc_rnd_t RND)
Set ROP to the hyperbolic tangent of OP, rounded according to RND
with the precision of ROP.
-- Function: int mpc_asin (mpc_t ROP, mpc_t OP, mpc_rnd_t RND)
-- Function: int mpc_acos (mpc_t ROP, mpc_t OP, mpc_rnd_t RND)
-- Function: int mpc_atan (mpc_t ROP, mpc_t OP, mpc_rnd_t RND)
Set ROP to the inverse sine, inverse cosine, inverse tangent of OP,
rounded according to RND with the precision of ROP.
-- Function: int mpc_asinh (mpc_t ROP, mpc_t OP, mpc_rnd_t RND)
-- Function: int mpc_acosh (mpc_t ROP, mpc_t OP, mpc_rnd_t RND)
-- Function: int mpc_atanh (mpc_t ROP, mpc_t OP, mpc_rnd_t RND)
Set ROP to the inverse hyperbolic sine, inverse hyperbolic cosine,
inverse hyperbolic tangent of OP, rounded according to RND with
the precision of ROP. The branch cut of MPC_ACOSH is (-\infty, 1).

File: mpc.info, Node: Miscellaneous Complex Functions, Next: Advanced Functions, Prev: Trigonometric Functions, Up: Complex Functions
5.10 Miscellaneous Functions
============================
-- Function: int mpc_urandom (mpc_t ROP, gmp_randstate_t STATE)
Generate a uniformly distributed random complex in the unit square
[0, 1] * [0, 1]. Return 0, unless an exponent in the real or
imaginary part is not in the current exponent range, in which case
that part is set to NaN and a zero value is returned. The second
argument is a `gmp_randstate_t' structure which should be created
using the GMP `rand_init' function, see the GMP manual.
-- Function: const char * mpc_get_version (void)
Return the MPC version, as a null-terminated string.
-- Macro: MPC_VERSION
-- Macro: MPC_VERSION_MAJOR
-- Macro: MPC_VERSION_MINOR
-- Macro: MPC_VERSION_PATCHLEVEL
-- Macro: MPC_VERSION_STRING
`MPC_VERSION' is the version of MPC as a preprocessing constant.
`MPC_VERSION_MAJOR', `MPC_VERSION_MINOR' and
`MPC_VERSION_PATCHLEVEL' are respectively the major, minor and
patch level of MPC version, as preprocessing constants.
`MPC_VERSION_STRING' is the version as a string constant, which
can be compared to the result of `mpc_get_version' to check at run
time the header file and library used match:
if (strcmp (mpc_get_version (), MPC_VERSION_STRING))
fprintf (stderr, "Warning: header and library do not match\n");
Note: Obtaining different strings is not necessarily an error, as
in general, a program compiled with some old MPC version can be
dynamically linked with a newer MPC library version (if allowed by
the library versioning system).
-- Macro: long MPC_VERSION_NUM (MAJOR, MINOR, PATCHLEVEL)
Create an integer in the same format as used by `MPC_VERSION' from
the given MAJOR, MINOR and PATCHLEVEL. Here is an example of how
to check the MPC version at compile time:
#if (!defined(MPC_VERSION) || (MPC_VERSION<MPC_VERSION_NUM(2,1,0)))
# error "Wrong MPC version."
#endif

File: mpc.info, Node: Advanced Functions, Next: Internals, Prev: Miscellaneous Complex Functions, Up: Complex Functions
5.11 Advanced Functions
=======================
-- Macro: MPC_SET_X_Y (REAL_SUFFIX, IMAG_SUFFIX, ROP, REAL, IMAG, RND)
The macro MPC_SET_X_Y is designed to serve as the body of an
assignment function and cannot be used by itself. The REAL_SUFFIX
and IMAG_SUFFIX parameters are the types of the real and imaginary
part, that is, the `x' in the `mpfr_set_x' function one would use
to set the part; for the mpfr type, use `fr'. REAL (respectively
IMAG) is the value you want to assign to the real (resp.
imaginary) part, its type must conform to REAL_SUFFIX (resp.
IMAG_SUFFIX). RND is the `mpc_rnd_t' rounding mode. The return
value is the usual inexact value (*note Return Value:
return-value.).
For instance, you can define mpc_set_ui_fr as follows:
int mpc_set_ui_fr (mpc_t rop, long int re, double im, mpc_rnd_t rnd)
MPC_SET_X_Y (ui, fr, rop, re, im, rnd);

File: mpc.info, Node: Internals, Prev: Advanced Functions, Up: Complex Functions
5.12 Internals
==============
These macros and functions are mainly designed for the implementation
of MPC, but may be useful for users too. However, no upward
compatibility is guaranteed. You need to include `mpc-impl.h' to use
them.
The macro `MPC_MAX_PREC(z)' gives the maximum of the precisions of
the real and imaginary parts of a complex number.

File: mpc.info, Node: Contributors, Next: References, Prev: Complex Functions, Up: Top
Contributors
************
The main developers of the MPC library are Andreas Enge, Philippe
The'veny and Paul Zimmermann. Patrick Pe'lissier has helped cleaning
up the code. Marc Helbling contributed the `mpc_ui_sub' and
`mpc_ui_ui_sub' functions.

File: mpc.info, Node: References, Next: Concept Index, Prev: Contributors, Up: Top
References
**********
* Torbjo"rn Granlund et al. `gmp' - GNU multiprecision library.
Version 4.2.4, `http://gmplib.org/'.
* Guillaume Hanrot, Vincent Lefe`vre, Patrick Pe'lissier, Paul
Zimmermann et al. `mpfr' - A library for multiple-precision
floating-point computations with exact rounding.
Version 2.4.1, `http://www.mpfr.org'.
* IEEE standard for binary floating-point arithmetic, Technical
Report ANSI-IEEE Standard 754-1985, New York, 1985. Approved
March 21, 1985: IEEE Standards Board; approved July 26, 1985:
American National Standards Institute, 18 pages.
* Donald E. Knuth, "The Art of Computer Programming", vol 2,
"Seminumerical Algorithms", 2nd edition, Addison-Wesley, 1981.
* ISO/IEC 9899:1999, Programming languages — C.

File: mpc.info, Node: Concept Index, Next: Function Index, Prev: References, Up: Top
Concept Index
*************
[index]
* Menu:
* Arithmetic functions: Basic Arithmetic. (line 6)
* Comparison functions: Complex Comparison. (line 3)
* Complex arithmetic functions: Basic Arithmetic. (line 6)
* Complex assignment functions: Assigning Complex Numbers.
(line 6)
* Complex comparisons functions: Complex Comparison. (line 3)
* Complex functions: Complex Functions. (line 6)
* Complex number: MPC Basics. (line 15)
* Conditions for copying MPC: Copying. (line 6)
* Conversion functions: Converting Complex Numbers.
(line 6)
* Copying conditions: Copying. (line 6)
* Installation: Installing MPC. (line 6)
* Logarithm: Power Functions and Logarithm.
(line 6)
* Miscellaneous complex functions: Miscellaneous Complex Functions.
(line 6)
* mpc.h: MPC Basics. (line 6)
* Power functions: Power Functions and Logarithm.
(line 6)
* Precision: MPC Basics. (line 19)
* Projection and Decomposing Functions: Projection & Decomposing.
(line 6)
* Reporting bugs: Reporting Bugs. (line 6)
* Rounding Mode: MPC Basics. (line 24)
* String and stream input and output: String and Stream Input and Output.
(line 3)
* Trigonometric functions: Trigonometric Functions.
(line 6)
* User-defined precision: Complex Functions. (line 12)

File: mpc.info, Node: Function Index, Prev: Concept Index, Up: Top
Function and Type Index
***********************
[index]
* Menu:
* _Complex: Converting Complex Numbers.
(line 10)
* mpc_abs: Basic Arithmetic. (line 78)
* mpc_acos: Trigonometric Functions.
(line 38)
* mpc_acosh: Trigonometric Functions.
(line 44)
* mpc_add: Basic Arithmetic. (line 13)
* mpc_add_fr: Basic Arithmetic. (line 17)
* mpc_add_ui: Basic Arithmetic. (line 15)
* mpc_arg: Projection & Decomposing.
(line 21)
* mpc_asin: Trigonometric Functions.
(line 37)
* mpc_asinh: Trigonometric Functions.
(line 43)
* mpc_atan: Trigonometric Functions.
(line 39)
* mpc_atanh: Trigonometric Functions.
(line 45)
* mpc_clear: Initializing Complex Numbers.
(line 22)
* mpc_cmp: Complex Comparison. (line 7)
* mpc_cmp_si: Complex Comparison. (line 10)
* mpc_cmp_si_si: Complex Comparison. (line 9)
* mpc_conj: Basic Arithmetic. (line 73)
* mpc_cos: Trigonometric Functions.
(line 11)
* mpc_cosh: Trigonometric Functions.
(line 29)
* mpc_div: Basic Arithmetic. (line 55)
* mpc_div_2exp: Basic Arithmetic. (line 96)
* mpc_div_fr: Basic Arithmetic. (line 61)
* mpc_div_ui: Basic Arithmetic. (line 57)
* mpc_exp: Power Functions and Logarithm.
(line 29)
* mpc_fma: Basic Arithmetic. (line 102)
* mpc_fr_div: Basic Arithmetic. (line 63)
* mpc_fr_sub: Basic Arithmetic. (line 25)
* mpc_free_str: String and Stream Input and Output.
(line 68)
* mpc_get_ldc: Converting Complex Numbers.
(line 11)
* mpc_get_prec: Initializing Complex Numbers.
(line 50)
* mpc_get_prec2: Initializing Complex Numbers.
(line 55)
* mpc_get_str: String and Stream Input and Output.
(line 51)
* mpc_get_version: Miscellaneous Complex Functions.
(line 15)
* mpc_imag: Projection & Decomposing.
(line 11)
* mpc_imagref: Projection & Decomposing.
(line 16)
* mpc_init2: Initializing Complex Numbers.
(line 11)
* mpc_init3: Initializing Complex Numbers.
(line 17)
* mpc_inp_str: String and Stream Input and Output.
(line 77)
* mpc_log: Power Functions and Logarithm.
(line 33)
* mpc_mul: Basic Arithmetic. (line 36)
* mpc_mul_2exp: Basic Arithmetic. (line 90)
* mpc_mul_fr: Basic Arithmetic. (line 42)
* mpc_mul_i: Basic Arithmetic. (line 46)
* mpc_mul_si: Basic Arithmetic. (line 40)
* mpc_mul_ui: Basic Arithmetic. (line 38)
* mpc_neg: Basic Arithmetic. (line 69)
* mpc_norm: Basic Arithmetic. (line 83)
* mpc_out_str: String and Stream Input and Output.
(line 112)
* mpc_pow: Power Functions and Logarithm.
(line 11)
* mpc_pow_d: Power Functions and Logarithm.
(line 13)
* mpc_pow_fr: Power Functions and Logarithm.
(line 23)
* mpc_pow_ld: Power Functions and Logarithm.
(line 15)
* mpc_pow_si: Power Functions and Logarithm.
(line 17)
* mpc_pow_ui: Power Functions and Logarithm.
(line 19)
* mpc_pow_z: Power Functions and Logarithm.
(line 21)
* mpc_proj: Projection & Decomposing.
(line 25)
* mpc_real: Projection & Decomposing.
(line 7)
* mpc_realref: Projection & Decomposing.
(line 15)
* mpc_rnd_t: MPC Basics. (line 24)
* mpc_set: Assigning Complex Numbers.
(line 17)
* mpc_set_d: Assigning Complex Numbers.
(line 26)
* mpc_set_d_d: Assigning Complex Numbers.
(line 56)
* mpc_set_dc: Assigning Complex Numbers.
(line 29)
* mpc_set_f: Assigning Complex Numbers.
(line 34)
* mpc_set_f_f: Assigning Complex Numbers.
(line 64)
* mpc_set_fr: Assigning Complex Numbers.
(line 35)
* mpc_set_fr_fr: Assigning Complex Numbers.
(line 66)
* mpc_set_ld: Assigning Complex Numbers.
(line 27)
* mpc_set_ld_ld: Assigning Complex Numbers.
(line 58)
* mpc_set_ldc: Assigning Complex Numbers.
(line 31)
* mpc_set_nan: Assigning Complex Numbers.
(line 80)
* mpc_set_prec: Initializing Complex Numbers.
(line 42)
* mpc_set_q: Assigning Complex Numbers.
(line 33)
* mpc_set_q_q: Assigning Complex Numbers.
(line 62)
* mpc_set_si: Assigning Complex Numbers.
(line 23)
* mpc_set_si_si: Assigning Complex Numbers.
(line 50)
* mpc_set_sj: Assigning Complex Numbers.
(line 25)
* mpc_set_sj_sj: Assigning Complex Numbers.
(line 54)
* mpc_set_str: String and Stream Input and Output.
(line 38)
* mpc_set_ui: Assigning Complex Numbers.
(line 22)
* mpc_set_ui_ui: Assigning Complex Numbers.
(line 48)
* mpc_set_uj: Assigning Complex Numbers.
(line 24)
* mpc_set_uj_uj: Assigning Complex Numbers.
(line 52)
* MPC_SET_X_Y: Advanced Functions. (line 7)
* mpc_set_z: Assigning Complex Numbers.
(line 32)
* mpc_set_z_z: Assigning Complex Numbers.
(line 60)
* mpc_sin: Trigonometric Functions.
(line 7)
* mpc_sin_cos: Trigonometric Functions.
(line 16)
* mpc_sinh: Trigonometric Functions.
(line 25)
* mpc_sqr: Basic Arithmetic. (line 51)
* mpc_sqrt: Power Functions and Logarithm.
(line 7)
* mpc_strtoc: String and Stream Input and Output.
(line 8)
* mpc_sub: Basic Arithmetic. (line 21)
* mpc_sub_fr: Basic Arithmetic. (line 23)
* mpc_sub_ui: Basic Arithmetic. (line 27)
* mpc_swap: Assigning Complex Numbers.
(line 83)
* mpc_t: MPC Basics. (line 15)
* mpc_tan: Trigonometric Functions.
(line 21)
* mpc_tanh: Trigonometric Functions.
(line 33)
* mpc_ui_div: Basic Arithmetic. (line 59)
* mpc_ui_sub: Basic Arithmetic. (line 29)
* mpc_ui_ui_sub: Basic Arithmetic. (line 31)
* mpc_urandom: Miscellaneous Complex Functions.
(line 7)
* MPC_VERSION: Miscellaneous Complex Functions.
(line 18)
* MPC_VERSION_MAJOR: Miscellaneous Complex Functions.
(line 19)
* MPC_VERSION_MINOR: Miscellaneous Complex Functions.
(line 20)
* MPC_VERSION_NUM: Miscellaneous Complex Functions.
(line 37)
* MPC_VERSION_PATCHLEVEL: Miscellaneous Complex Functions.
(line 21)
* MPC_VERSION_STRING: Miscellaneous Complex Functions.
(line 22)
* mpfr_prec_t: MPC Basics. (line 19)

Tag Table:
Node: Top946
Node: Copying1607
Node: Introduction to MPC2265
Node: Installing MPC2973
Node: Reporting Bugs7632
Node: MPC Basics8961
Ref: return-value12611
Node: Complex Functions14053
Node: Initializing Complex Numbers15202
Node: Assigning Complex Numbers17616
Node: Converting Complex Numbers22024
Node: String and Stream Input and Output22658
Ref: string-io22805
Node: Complex Comparison29237
Node: Projection & Decomposing30316
Node: Basic Arithmetic31691
Node: Power Functions and Logarithm36331
Node: Trigonometric Functions37986
Node: Miscellaneous Complex Functions40211
Node: Advanced Functions42356
Node: Internals43429
Node: Contributors43876
Node: References44222
Node: Concept Index45136
Node: Function Index47450

End Tag Table
Reference in New Issue View Git Blame Copy Permalink