- stubbed out arch_cpu_init_percpu(),
- make atomic ops declarations extern "C",
- move calls to [i]sync inside the asm code that needs it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32067 a95241bf-73f2-0310-859d-f6bbb57e9c96
* SMP:
- Added smp_send_broadcast_ici_interrupts_disabled(), which is basically
equivalent to smp_send_broadcast_ici(), but is only called with interrupts
disabled and gets the CPU index, so it doesn't have to use
smp_get_current_cpu() (which dereferences the current thread).
- Added cpu index parameter to smp_intercpu_int_handler().
* x86:
- arch_int.c -> arch_int.cpp
- Set up an IDT per CPU. We were using a single IDT for all CPUs, but that
can't work, since we need different tasks for the double fault interrupt
vector.
- Set the per CPU double fault task gates correctly.
- Renamed set_intr_gate() to set_interrupt_gate and set_system_gate() to
set_trap_gate() and documented them a bit.
- Renamed double_fault_exception() x86_double_fault_exception() and fixed
it not to use smp_get_current_cpu(). Instead we have the new
x86_double_fault_get_cpu() that deducts the CPU index from the used stack.
- Fixed the double_fault interrupt handler: It no longer calls int_bottom to
avoid accessing the current thread.
* debug.cpp:
- Introduced explicit debug_double_fault() to enter the kernel debugger from
a double fault handler.
- Avoid using smp_get_current_cpu().
- Don't use kprintf() before sDebuggerOnCPU is set. Otherwise
acquire_spinlock() is invoked by arch_debug_serial_puts().
Things look a bit better when the current thread pointer is broken -- we run
into kernel_debugger_loop() and successfully print the "Welcome to KDL"
message -- but we still dereference the thread pointer afterwards, so that we
don't get a usable kernel debugger yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32050 a95241bf-73f2-0310-859d-f6bbb57e9c96
info is not part of the media_format otherwise.
* Finished enough in the AVFormatWriter and AVCodecEncoder that we can now
actually create AVIs and MPGs and encode MPEG1, MPEG2 and MPEG4 video.
But no audio as of yet. Also, there is no bit-rate/quality setup, so it seems
libavformat is using the least possible bit-rate/quality.
* Enable some more muxers and encoders in the FFmpeg libs.
* Uses pixel format conversion from libswsscale, need to read the documentation
again, but I think it makes the plugin GPL.
* Fixed includes in libswscale/swscale.h, this is now an unmodified FFmpeg 0.5
header again (AFAICT).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32043 a95241bf-73f2-0310-859d-f6bbb57e9c96
storage.
* Remove reduntant information from the header (field_count vs. fields_size).
* Remove checksums previously used to validate the message passing by area
mechanism.
* Move variables that are purely used by the instance out of the header and into
the BMessage object.
* Use more sensible types for the different message fields.
* Reduce some field sizes to realistic values.
* Make size_t values into uint32 values so the message format will not change
when later moving to 64 bits.
* Pack the structures used for flat message storage so it doesn't change
because of padding.
* Fix message passing by area. It never worked because the created area was
never actually filled with any data!
* Some more allocation checks with graceful fallbacks (should be all now).
* Some more checks for negative index values (should also be all now).
* Make printing more inline with how the rest of the class works and make some
of the output more consistent.
* Also add the new unsigned types to PrintToStream() output.
* Fix printing of unknown types and invalid BMessages, it would always have
printed only the first entry respectively the same error.
* Added some clarifying comments.
* Cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32039 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added x86_double_fault_get_cpu(), a save way to get the CPU index when in
the double fault handler. smp_get_current_cpu() requires at least a somewhat
intact thread structure, so we rather want to avoid it when handling a double
fault. There are a lot more of those dependencies in the KDL entry code.
Working on it...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32028 a95241bf-73f2-0310-859d-f6bbb57e9c96
media_file_format as input, so that the Writer knows what kind of file is
needed.
* Also, since information about the stream format is going to be needed at the
Writer level as well, the AllocateCookie() method gets the stream
media_format.
* Fleshed out some aspects of AVFormatWriter, many TODOs are left.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32025 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Improved Encoder API towards what we need for the get_next_encoder() variants
and the BMediaTrack API.
* Implemented the rest of MediaWriter. Still undecided what to make of
AddTrackInfo(). BMediaEncoder has that as well, which hints that this is
something the Encoder needs to support. But it could also be that this is
only possible to support in Writer.
* Wired a lot of previously unimplemented methods in BMediaFile and BMediaTrack
needed for write support. If I have not overlooked anything, only the
parameter stuff is still unimplemented now.
This is all untested, since the FFMpeg Encoder and Writer are still only stubs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32013 a95241bf-73f2-0310-859d-f6bbb57e9c96
The AddOnManager in the media_server registers one encoder entry per
successful EncoderPlugin::RegisterNextEncoder(). This gives us a first idea
what media_format_family and input/output media_type is supported. The
mechanism may have to be extended, or the Encoder needs an API to specialize
a format further. In that case, the get_next_encoder() version that takes
optional _acceptedInput/OutputFormat needs to instantiate the plugin and
needs to ask the Encoder. But AFAIK, no app uses it like that anyway.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@32005 a95241bf-73f2-0310-859d-f6bbb57e9c96
in PluginManager is reenabled. We use the media_codec_info.id to reference
a specific plugin, while the sub_id will be used to reference individual
Encoders that the plugin supports. No idea if that's how it was intented, but
some comments hint in this direction. I failed to mention this before, but
comments are of course very welcome on any of these commits, as always.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31993 a95241bf-73f2-0310-859d-f6bbb57e9c96
used to mark entries after recovering a tracing log from a previous session.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31991 a95241bf-73f2-0310-859d-f6bbb57e9c96
changed method signature accordingly and disabled the code for now, since
the media_server communication has not been adapted yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31985 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented old count_workspaces(), and set_workspace_count() using the
new functions.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31971 a95241bf-73f2-0310-859d-f6bbb57e9c96
for every BMenuItem, have them created in _init_interface_kit(), and keep
them cached. This required some reorganisation of the code in Menu and MenuItem.
Also has the side effect that BMenuItem doesn't have to know about the
alt/ctrl/command keys stuff.
Added a comment in BMenu::AttachedToWindow().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31962 a95241bf-73f2-0310-859d-f6bbb57e9c96
* _SetTo(const BVariant&): Acquire a reference for the wrong object.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31959 a95241bf-73f2-0310-859d-f6bbb57e9c96
and rows.
* set_workspace_count() now uses the logic formerly found in
WorkspacesView::_GetGrid() to determine the layout.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31958 a95241bf-73f2-0310-859d-f6bbb57e9c96
media_file_format array (it remains with the plugin itself, as with
DecoderPlugins).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31955 a95241bf-73f2-0310-859d-f6bbb57e9c96
a list for known media_file_formats. The internal IDs map to plugins.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31950 a95241bf-73f2-0310-859d-f6bbb57e9c96
* resolved a couple of redundant function declaration in our public headers
* adjusted zipomatic accordingly - everything else built fine
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31938 a95241bf-73f2-0310-859d-f6bbb57e9c96
Don't yet know if that's the way it's supposed to work...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31933 a95241bf-73f2-0310-859d-f6bbb57e9c96
call to fetch non-clear pages.
* B_PHYSICAL_BASE_ADDRESS does now imply B_CONTIGUOUS.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31932 a95241bf-73f2-0310-859d-f6bbb57e9c96
those, too. Among other things, this should facilitate making use of wstring
with gcc4.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31927 a95241bf-73f2-0310-859d-f6bbb57e9c96
* added declaration of strtof() to stdlib.h, as we now provide it alongside
with strtod()
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31926 a95241bf-73f2-0310-859d-f6bbb57e9c96
retrieving WriterPlugins and EncoderPlugins from the media_addon_server.
* Enabled respective code in PluginManager (and fixed the copy&paste bugs),
the server side is still missing, though...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31924 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Reverted r31809 as it introduced a race condition; if the I/O request had been
notified, it could already been deleted at that point.
* Instead, we need to notify the request in each file system/driver that uses
it. Added new notify_io_request() function that does that exactly.
* Added a TODO comment to the userlandfs where the request notification needs
a bit more thought.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31903 a95241bf-73f2-0310-859d-f6bbb57e9c96
were supposed to be deleted/changed with the previous commit.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31888 a95241bf-73f2-0310-859d-f6bbb57e9c96
each attribute access needed 3 syscalls, now only one as it should.
* Renamed the new Haiku call fs_open_attr() to fs_fopen_attr(), and added a new
function fs_open_attr() that takes a path (same semantics as the
fs_[f]open_attr_dir() functions already present in BeOS).
* Merged former _kern_open_attr(), and _kern_create_attr() into one syscall.
* Cleaned up vfs.h.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@31881 a95241bf-73f2-0310-859d-f6bbb57e9c96
