* otherwise the signal to be handled might be blocked. fixes #15193
* also remove automatic syscall restart on _kern_select, to match Linux and
BSDs behavior: this fixes parallel build with newer gnu make, which happens
to use pselect.
* also remove automatic syscall restart on _kern_poll.
from https://man7.org/linux/man-pages/man7/signal.7.html
"The following interfaces are never restarted after being
interrupted by a signal handler, regardless of the use of
SA_RESTART; they always fail with the error EINTR when
interrupted by a signal handler: ...
select(2), and pselect(2)."
from https://notes.shichao.io/unp/ch6/
"Berkeley-derived kernels never automatically restart select."
Change-Id: I7f86d221eae1ad93d8a308a75581d2c30a369c9e
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3627
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
- Switch to 25MHz clock
- Switch to 4bit transfers mode (the default is 1bit)
Reading and writing SD cards do not seem to work anymore with these
changes. I get invalid data on read, and on write, an interrupt is never
called in some cases.
On sparc, the minimal page size we can use is 8K. Since B_PAGE_SIZE and
PAGESIZE defines were hardcoded to 4K, this resulted in a lot of
confusion in all code trying to manipulate pages.
- Remove cpu.h from headers/private/kernel/arch/*. It dates back from
NewOS and was not used anymore since our kernel uses B_PAGE_SIZE
(PAGE_SIZE was the only thing defined in this header).
- Add posix/arch/*/limits.h with the arch specific page size and include
it from the main limits.h.
- Adjust bios_ia32/debug.cpp which was the only place using the
PAGE_SIZE constant from the deleted headers.
- Change OS.h to define B_PAGE_SIZE to be the same as POSIX PAGESIZE.
- Define PAGESIZE in the build header if the host OS doesn't.
Change-Id: I8c3732cf952ea3c2f088aa16d216678fbf198b96
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3558
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
The main differences:
- The initialization sequence requires an additional command (this was
already done)
- The layout of the CSD register and the way to compute the device
geometry from it changes
- The read and write commands parameter is a sector number instead of a
byte position
Change-Id: Ie729e333c9748f36b37acd70c970adfd425cf0b6
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3512
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
The SDHCI spec also offers an "advanced DMA" mode where we can use
scatter-gather lists. It would allow to remove several of the DMA
restrictions, but hardware support for it is optional, so we need this
version anyway.
The geometry is retrieved on demand in the first read or write or in a
call to the get geometry or get device size ioctl. It is not possible to
retrieve it from the device initialization because that is called as
part of the mmc_bus scanning, which needs a specific sequence of
commands and keeps the bus locked to prevent drivers to insert their own
commands in the middle of that sequence.
TODO:
- Move the DMA restrictions definition to sdhci_pci and forward it up to
mmc_disk (which is the one creating the IOScheduler)
- Decide if we want to keep non-DMA support (probably should, but it
makes things more complex, because it uses virtual addresses)
Change-Id: Ib1dd14eacf62052d747bfb3ef7820bc5a34d3030
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3471
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
* The "default" of 3MiB wasn't enough for modern larger media
formats, resulting in inability to play 4k video no matter
how much horse power you threw at Haiku. (4k is ~8MiB)
* This dynamically calculates the ChunkCache based on the
video framesize * 2.
* 4k video now plays smoothly on my Ryzen 1800x.
Change-Id: I65bf6bd6fa60ac3196ea70eeeb5e655d43c10bcd
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3598
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Mostly the same as PowerPC, using OpenFirmware.
Change-Id: I197cc181e92da92c272ee9cfa20c8ad2d2c63d41
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3579
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
The manually written code was all wrong (missing branch delay slots,
wrong type of return instruction used, probably more bugs). Use the same
approach as x86 to have inline functions instead, which is much better
for performance and simpler to write.
Change-Id: Iac0fc814c15311658f983da58ac7f9d3edd75b81
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3595
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
The definition in SupportDefs.h using gcc builtins is sufficient. No
need for a custom one. The same approach is used on x86 with gcc8
already, but other platforms had not been adjusted to use it.
Change-Id: I3973ff723a31f90cc8d19ac098eb1e85d471d610
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3594
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
The sparc ABI reserves the g7 register for this.
Change-Id: I93b81ecef72cde859972ef7b7f6b9991d35f9f29
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3583
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
It was bumped for bios and efi from previously very low values, but
other architectures did not follow.
Change-Id: I6ce92e2cdb0261d4d0637753e77d555d407073fc
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3575
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
* Introduce fat_shell for build system fat manipulation
* Will theoretically let us do away with mtools when we
have another internal tool for partition manipulation
Change-Id: I661be556e79009842f157a9402c8f85da85d6336
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3556
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
la57 kernel support is required. we simply add a 5th level and enable the cr4
feature. the safemode option "256tb_memory_limit" is named after the 4gb one,
but the current support is limited to 512GB as before (this can be later extended).
Change-Id: I922774473c4a6112a0e4ff74162285ad58aa53af
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3552
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Reviewed-by: Axel Dörfler <axeld@pinc-software.de>
* Makes our UEFI bootloader somewhat FDT/DTB aware on all
architectures.
* Will report when an FDT is found, and provide it to kernels
that want it.
Change-Id: I90324fc0579a9c835e60568fa9b654c2df0aba27
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3543
Reviewed-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
It allow to use arbitrary handle type, null value and destructor function.
Change-Id: I87c444cb7ef1b08d1dbed7fe4171700171d651d2
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2977
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Reviewed-by: Axel Dörfler <axeld@pinc-software.de>
First implementation of reading sectors from an SD card.
This is not the best performance for many reasons:
- No DMA
- Reads only one sector at a time
- Cannot read more than 512 bytes per syscall
Also there are major limitations:
- Cannot read less than 512 bytes. The hardware of course works in full
sectors. The mmc_disk driver should go through the io scheduler to
make sure requests have a reasonable size and offset, and nothing
tries to read just a few bytes in the middle of a sector.
- SD cards only (no SDHC, no MMC)
Architecture problems:
I think too much of the implementation is done in sdhci_pci and should
be moved to the upper layers. However it is difficult to say without
having implemented DMA (which indeed will be at the low level of the
sdhci controller). It doesn't help that the order of operations is a
bit different depending on wether there is DMA or not. In DMA mode you
first prepare the buffer, then run the command. In non-DMA mode you
first send the command, then read the data into the buffer. We need an
API at the mmc_bus level that doesn't care about that low-level detail.
There are other things that the MMC bus should be doing however, such
as switching to different clock speeds depending on which card is
activated and how fast it can go.
At least the following should be done:
- The read method for mmc_bus and sdhci_pci should use a scatter-gather
structure as a parameter instead of a single buffer
- See if can be integrated into ExecuteCommand at sdhci level (it's
essentially a command with an additional data phase)
Change-Id: I688b6c694561074535c9c0c2545f06dc04b06e7d
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3466
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
No read and write support for now. But we implement getting SD card
capacity. SDHC is not supported yet (it uses a different layout for the
CSD register which will be rejected by this version of the code)
Change-Id: Ife844a62f3846c0a780259e9a3a08195e2fd965e
Reviewed-on: https://review.haiku-os.org/c/haiku/+/1068
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
C++ don't allow zero size class fields. If field with empty class field
is used, it's size will be 1 byte.
Create DeleteFunc instance as local variable at each use instead.
Fixes #16638.
Change-Id: Ifb76c45ea02e9fed014751542ee5f16f41e11d15
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3458
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
The same as CObjectDeleter.
Change-Id: I85c4cb3635f01f13e529ca087324cc2fcb42cfc0
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3456
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
It allows to make typedef of pointer types and declaring pointers in headers.
Store of destructor function pointer in CObjectDeleter is no longer needed.
Change-Id: Ic629fd10b28b09f4190edf8ba6b911ca3108ab0e
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3455
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Only keep a fixed number of icons in memory at once.
Completes To #15370
Change-Id: I23e3a4fa7559894034f45afb3b536910ea037078
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3367
Reviewed-by: Rene Gollent <rene@gollent.com>
Currently used by fixup_next_boot_floppy.
Change-Id: I47c10657b5280f00e470a3171ad11744859ce76c
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3310
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
For now it just forwards the command to the SDHCI controller.
The bus will gain more features and functions as work advances (tracking
which card is active, arbitration of DMA transfers, etc).
Change-Id: I094eb84f27e7789387a3f8fb65fba1e5fcfa3e8a
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3094
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Update BTab::DrawTab() to pass the current index, the index of the
selected tab, and the index of the first and last tabs into
BControlLook::DrawActiveTab() and BControlLook::DrawInactiveTab().
This allows you to draw tabs differently in your BTab or BControlLook
subclass in many different circumstances.
Modify BControlLook API to add indexes to DrawActiveTab() and
DrawInactiveTab() like so:
void DrawActiveTab(..., int32 index = 0, int32 selected = -1,
int32 first = 0, int32 last = 0);
void DrawInactiveTab(..., int32 index = 0, int32 selected = -1,
int32 first = 0, int32 last = 0);
These extra indexes are not used by HaikuControlLook which relies only
on if the tab is active or inactive to draw.
Add IndexOf(BTab* tab) method to BTabView and document it to get the
index of the current tab in BTab::DrawTab(). Also add a warning in the
BTabView::DrawTab() method not to use the position and full parameters
anymore, use BTabView::IndexOf(), BTabView::Selection(), and
BTabView::TabCount() to get the info you need.
Using a dynamic_cast to a BTabView in BeControlLook to determine if the
view is derived from a BTabView didn't work in the case of WebPositive.
Furthermore, WebPositive does custom tab drawing which needed to be
updated for alternative control look. These index parameters passed from
BTab to BeControlLook allow us to draw the tab like BeOS without relying
on a dynamic_cast to BTabView to get the info.
Reproduce the functionality described above for BTab in WebPositive's
custom tabs. Eliminate no longer needed code in favor of using indexes.
Update WebPositive custom tabs to use BControlLook::DrawTabFrame()
instead of BControlLook::DrawInactiveTab() matching the update made in
BTabView.
In BeControlLook::DrawTabFrame() fill rect with base color, WebPositive
doesn't draw any tab background, so it expects this work to be done for
it.
Eliminate hasFrames variable from WebPositive.
Rename TabSelected(index) to UpdateSelection(index) in WebPositive to
better reflect its purpose.
Adjusted HaikuControlLook::DrawInactiveTab() to draw the tab borders more
selectively. Only draw border if left border is set for top and bottom tabs
or top border is set for left and right tabs. Undo no longer needed frame
manipulation border drawing workaround in HaikuControlLook::DrawTabFrame().
Draw scroll bar triangle without using DrawArrowShape().
Unlike in HaikuControlLook, DrawArrowShape() is used to draw arrows in
BOutlineListView and menus distinctly from how it draws arrows in scroll
bars. Draw our distinct arrows in DrawSrollBarButtons() instead.
This fixes overflow of time edit up-down arrows in Clock prefs and the
collapse-expand arrow in Deskbar not being vertically centered.
In DrawBorders() only inset if we actually draw the border.
Fix alignment issues with DrawSliderThumb dots for example in
MediaPlayer volume knobs.
Draw using line arrays calling AddLine instead of StrokeLine in
several places.
DrawMenuBar() extends to draw final pixel which eliminates an extra
lines at the end of menu bars.
Truncate button labels better fixing a few issues for example keymap
keyboard layout button labels. Button insets has been updated a bit
to fix drawing issues with buttons missing a border.
Using a dynamic_cast to a BButton to determine if a view is a button
in BeControlLook didn't work in the case of the keymap label. Look for
B_FLAT, B_HOVER, or B_DEFAULT_BUTTON flag in BeControlLook::DrawLabel()
to draw the label inverted on click. Pass the B_FLAT flag from Keymap
keys when drawing using BControlLook so that the label is inverted.
Change-Id: I07631f4b006bdb9aeca2adc9cbdf2da54dae8e92
Reviewed-on: https://review.haiku-os.org/c/haiku/+/2866
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
when the cpufreq module is loaded, we let the scheduler update its policy.
Improve assert report
CoreEntry::GetLoad() could return more than kMaxLoad.
Change-Id: I127f9b3e8062b5996872aae30b4021b9904fa179
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3216
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
implement on x86 with APERFMPERF.
Change-Id: Ia484854c76dee76c5447983de15800a25d791d39
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3213
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
to call a function on the target cpu. Early mechanism not available.
Change-Id: I9d049e618c319c59729d1ab53fb313b748f82315
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3212
Reviewed-by: Axel Dörfler <axeld@pinc-software.de>
This allows you to pass node_ref's around like you can entry_ref's.
Added node_ref_flatten(), node_ref_unflatten() and node_ref_swap() to
MessageUtils. These are close cousins to entry_ref_flatten(),
entry_ref_unflatten(), and entry_ref_swap() but for node_ref's.
Added B_NODE_REF_TYPE to TypeConstants.h in the Support Kit.
Added B_NODE_REF_TYPE to Debugger and ByteOrder in Support Kit,
B_NODE_REF_TYPE is treated the same as a B_REF_TYPE (entry_ref).
Add documentation for new NodeRef methods and B_NODE_REF_TYPE.
Change-Id: I32c6ed276bf1a7894a835b9fc9de5a882c35883c
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3182
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
When a thread is created, it is expected that some other thread (usually the
creating thread) will want to make sure it completes. This is done using the
pthread_join() or wait_for_thread() calls.
It is possible that threads end before another thread waits for its completion.
That's why there is a dead thread list for each team, which holds thread ids
and their exit status so that a call to pthread_join() or wait_for_thread() in
the future can complete succesfully.
The dead thread list was limited to 32 threads per team. If there would be
more, the oldest thread would be kicked off. This could cause issues in
situations where a team would create more than 32 threads, and would start
waiting for their result after they have finished. Some of the calls would fail
because the threads would no longer be in the dead list.
This specifically caused problems for cargo (the Rust package manager), which
could depending on the number of dependencies, could create more than 32
threads. See: https://github.com/nielx/rust/issues/3
This change removes the limit of dead threads within a team. Note that there is
a risk that a badly written program that does not detach or joins its threads
can make this an endless list, but the impact is relatively small (dead threads
only occupy a bit of kernel memory).
Change-Id: I0135dd54e10ee48a529f23228d21237d4f1a74e2
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3178
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
