Chunks may be physically contiguous, but virtually disjoint. Adding
physical addresses may cause ranges to be merged incorrectly.
Signed-off-by: Jessica Hamilton <jessica.l.hamilton@gmail.com>
* The BMediaClient is an higher level API to the media_kit. It
corresponds to what the layout API was for the interface_kit.
The main idea is to allow the developer concentrate only on
higher level details and avoiding handle with the tricky parts
of the media_kit. At the same time the general purpose node that
is implemented inside would allow implementing the best techniques
around thus at the same time reducing code duplication and increasing
efficiency.
* BMediaClient is WIP, this is the initial merge of the branch.
The initial development stone was set long time ago and walked
through various design/implementation phases.
* Ideally we should support this feature by default to allow
future improvements to the plugins management.
* Fixes the major memory corruption that lead to various
crashes on exit in MediaPlayer.
* beaglebone vs beagleboard
* While the boards are almost the same, they have
diff. FDT's now (more memory, different layout etc)
* Make u-boot script more rpi-like
(depend on u-boot for initial addresses)
* Wasn't working, still doesn't.
* Now pulling in latest amdgpu atombios.h headers
* Lots of DisplayPort cleanup and removal of legacy stuff
* Add obsolete atombios header for things that disappear
(amdgpu doesn't support older cards like we do)
* Introduce new code to support later encoder tables
* Drop radeon-specific encoder service from common dp_info
* Tested on HD 5450 hdmi
* Helps prevent mainboard explosions and other bad stuff.
* ...maybe not explosions, but bad things.
* The RX 480 reference design can pull as much as 90W
from its PCIe slot at load. PCIe is rated for 75W.
* This change overloads the PCIe power cables vs the PCIe
slot. The PCIe power cables can handle going over spec.
* Untested since we really can't come close to loading a
RX 480 without hardware OpenGL ^_^
* Should be able to test on real hardware within a week.
- Add new interface TeamFunctionSourceInformation. Currently this
exposes a single function allowing one to query for the currently
active source code given a FunctionDebugInfo instance.
- Implement TeamFunctionSourceInformation on TeamDebugInfo.
- Pass TeamFunctionSourceInformation to Dwarf{Team,Image}DebugInfo.
In turn, make use of it in DwarfImageDebugInfo::GetStatement() in
order to determine whether to return the corresponding assembly
or source statement.
With this piece of information, the debugger is now correctly able to
determine that the user is currently looking at disassembly despite debug
info being available, and consequently adjust its stepping behavior based on
that. Previously, the source code statement was always used, leading to it
not being possible to single step assembly lines in such a circumstance
without manually using run to cursor.
Other related cleanups:
- TeamDebugInfo now inherits BReferenceable directly, rather than relying on
indirectly inheriting it from TeamTypeInformation.
- Remove BReferenceable from TeamTypeInformation. The latter is only an
interface anyways, and inheriting that base class from multiple locations
was causing GCC5 trouble when resolving BReference<TeamDebugInfo>, even
when virtual inheritance was used.
The HashMap constructor was called before the heap is initialized,
ending up calling malloc from the OpenHashMap constructor.
Oddly it was still working on x86 but broke other platforms.
Instead we add a Lookup() static method to Partition,
which by default walks gPartitions for the id,
and recursively calls itself on the children lists.
This means we must add a partition even temporarily to gPartitions
before Scan()ing it though.
Signed-off-by: François Revol <revol@free.fr>
* Only set HAIKU_BOOT_PLATFORM to bios_ia32 if not defined
* Add gnuefi build feature
* Introduce BOOT_LDFLAGS, and move options for passing to linker
into ArchitectureSetup
* x86_64 compile fixes for warnings in boot loader
* loader/elf.cpp: don't include ELF32 support when targeting EFI
* relocation_func.cpp: copy of the relocation code from gnuefi
to make _relocate extern "C", and avoid including <efilib.h>
* boot_loader_efi.ld: copy of gnuefi's elf_x86_64_efi.lds,
modified to include support for C++ constructors, etc. Keep in
sync with the gnuefi package
Signed-off-by: Jessica Hamilton <jessica.l.hamilton@gmail.com>
There was some mixup with the interrupt registers, still:
- The driver uses 16-bit read/write, but on SandyBridge the register is
32 bits
- There is a global interrupt enable bit, which must be set to unmask
everything else
- The bits for vblank interrupt are not the same on SNB and later PCH
based devices, and the code mixed the two.
Move the computation of the interrupt bits to an helper function, and
use it everywhere to make sure we always use the right bits.
Modesetting
===========
My previous hack was setting the transcoder registers, instead of the
display ones. Do that the way it is designed in the driver instead:
- If there is a transcoder, set its registers, but do not set the
display timings. The display will remain set at its native (and only)
resolution, and panel fitting will adjust the output of the transcoder
to match.
- If there is no transcoder, set the display registers directly to the
native resolution, as it was done on previous generation devices.
- fPipeOffset hacks no longer needed
DPMS
====
It seems the panel control register is not readable on PCH? Anyway, the
code would loop forever waiting for the bit to become unset when turning
the display off. Waiting seems to not be needed, so just remove it as
well as the "unlock" bit, which does not work for me and results in a
black screen.
Remaining hacks
===============
I still need to force HEAD_MODE_A_ANALOG to get output on pipe B (LVDS
display) working. I suspect something is common to the two pipes or not
allocated to the right one.
This version will have less side effects on other generations and help
with getting things to work on SandyBridge and possibly later devices.
Please test and report.
This reverts commit 4f2b258c32efeab97f043519b7f2d4e22819d431.
This reverts commit c86f3dba238a44a8fcf7b1452c46f1cab68f525a.
This reverts commit 61fbdb0667c57f6d3d11d33bce6c01bdd625aaec.
This reverts commit b3f14fb7c715cf95b374ee749dcafd5537d1b017.
Add an Icon() and SetIcon() method. Override SetMarked() to set the
parent menu field icon.
Don't move the label right if icon is NULL. Make the first menu item
an IconMenuItem with a NULL icon. This allows the icon to draw in the
closed menu state.
icon gets updated even if you select an item in a submenu
http://insightfactory.tumblr.com/image/142366356207
* Make the color box a rectangle with proportions of golden ratio.
* Override GetContentSize() to make menu item area larger.
* Label should never truncate since I make sure there is enough room.
* Draw the label using BMenuItem parent class
* Carefully adjust the spacing so that there is an attractive amount of
padding between the checkmark and color box and the color box and label.
Add _AddMenu method to BMenuField that adds BColorMenuItem as its
base menu item. This shows the BColorMenuItem in the closed state.
Create BPrivate::MenuItemPrivate
Add a SetSubmenu() method to MenuItemPrivate that gives you
the ability to add a submenu after creating the object. This
method should be public
Skip disabled items
Color gets updated even if you select an item in a submenu
Architecture:
- Store and provide accessor for the size in bytes of the low-level
debug_cpu_state size of the respective target CPU. Adjust subclasses
to pass in the appropriate size information.
* Detect PCH model based on ISA bridge and save
into shared info for later use.
* On CougarPoint PCH systems, assign pipes via
special CPT registers
* Drop HasPlatformControlHub as PCH should be
based on more than just generation.
UserInterface:
- Add Clone() function to set of required virtuals. This asks the subclass
to create a new instance of its respective type.
{CommandLine,Graphical,Report}UserInterface:
- Implement the above function.
TeamDebugger:
- Add accessor for the currently active UI.
TargetHostInterface:
- Set correct request type when setting up the options for a team restart.
- Ask the TeamDebugger for its user interface and clone it in order to fill
in that aspect of the debug options. This fixes a regression introduced in
commit 880a64, which inadvertently resulted in team restarts no longer
working.
* Wait evaluation is done considering both position
and buffer size.
* Set back position to 0 after seeking.
* Simplify EvaluatePosition to take advantage of inheritance.
* Use back position to determine the current size of the buffer.
* Add more debug tracing.
* Other minor fixes.
* Implement Open/Close mechanism.
* Implement SetBuffer.
* Implement timeout handling.
* Improve Seek mechanism, this is now working by locking the
thread until the backend call SeekCompleted.
* Moved data locking in the internal buffer class, includes handling
of backend writes.
* Takes advantage of inheritance for getting the size. The choice is
made depending on the flags. This allow the implementer to easily
return a custom size by reimplementing GetSize. At the same time
a plain BAdapterIO can still have it's total size set, but the behavior
will change depending it's mutable or not.
* Some decisions are now made by considering everything in absolute
values.
* Other minor fixes.
