- Add new interface TeamFunctionSourceInformation. Currently this
exposes a single function allowing one to query for the currently
active source code given a FunctionDebugInfo instance.
- Implement TeamFunctionSourceInformation on TeamDebugInfo.
- Pass TeamFunctionSourceInformation to Dwarf{Team,Image}DebugInfo.
In turn, make use of it in DwarfImageDebugInfo::GetStatement() in
order to determine whether to return the corresponding assembly
or source statement.
With this piece of information, the debugger is now correctly able to
determine that the user is currently looking at disassembly despite debug
info being available, and consequently adjust its stepping behavior based on
that. Previously, the source code statement was always used, leading to it
not being possible to single step assembly lines in such a circumstance
without manually using run to cursor.
Other related cleanups:
- TeamDebugInfo now inherits BReferenceable directly, rather than relying on
indirectly inheriting it from TeamTypeInformation.
- Remove BReferenceable from TeamTypeInformation. The latter is only an
interface anyways, and inheriting that base class from multiple locations
was causing GCC5 trouble when resolving BReference<TeamDebugInfo>, even
when virtual inheritance was used.
There was some mixup with the interrupt registers, still:
- The driver uses 16-bit read/write, but on SandyBridge the register is
32 bits
- There is a global interrupt enable bit, which must be set to unmask
everything else
- The bits for vblank interrupt are not the same on SNB and later PCH
based devices, and the code mixed the two.
Move the computation of the interrupt bits to an helper function, and
use it everywhere to make sure we always use the right bits.
Modesetting
===========
My previous hack was setting the transcoder registers, instead of the
display ones. Do that the way it is designed in the driver instead:
- If there is a transcoder, set its registers, but do not set the
display timings. The display will remain set at its native (and only)
resolution, and panel fitting will adjust the output of the transcoder
to match.
- If there is no transcoder, set the display registers directly to the
native resolution, as it was done on previous generation devices.
- fPipeOffset hacks no longer needed
DPMS
====
It seems the panel control register is not readable on PCH? Anyway, the
code would loop forever waiting for the bit to become unset when turning
the display off. Waiting seems to not be needed, so just remove it as
well as the "unlock" bit, which does not work for me and results in a
black screen.
Remaining hacks
===============
I still need to force HEAD_MODE_A_ANALOG to get output on pipe B (LVDS
display) working. I suspect something is common to the two pipes or not
allocated to the right one.
This version will have less side effects on other generations and help
with getting things to work on SandyBridge and possibly later devices.
Please test and report.
This reverts commit 4f2b258c32efeab97f043519b7f2d4e22819d431.
This reverts commit c86f3dba238a44a8fcf7b1452c46f1cab68f525a.
This reverts commit 61fbdb0667c57f6d3d11d33bce6c01bdd625aaec.
This reverts commit b3f14fb7c715cf95b374ee749dcafd5537d1b017.
Add an Icon() and SetIcon() method. Override SetMarked() to set the
parent menu field icon.
Don't move the label right if icon is NULL. Make the first menu item
an IconMenuItem with a NULL icon. This allows the icon to draw in the
closed menu state.
icon gets updated even if you select an item in a submenu
http://insightfactory.tumblr.com/image/142366356207
* Make the color box a rectangle with proportions of golden ratio.
* Override GetContentSize() to make menu item area larger.
* Label should never truncate since I make sure there is enough room.
* Draw the label using BMenuItem parent class
* Carefully adjust the spacing so that there is an attractive amount of
padding between the checkmark and color box and the color box and label.
Add _AddMenu method to BMenuField that adds BColorMenuItem as its
base menu item. This shows the BColorMenuItem in the closed state.
Create BPrivate::MenuItemPrivate
Add a SetSubmenu() method to MenuItemPrivate that gives you
the ability to add a submenu after creating the object. This
method should be public
Skip disabled items
Color gets updated even if you select an item in a submenu
Architecture:
- Store and provide accessor for the size in bytes of the low-level
debug_cpu_state size of the respective target CPU. Adjust subclasses
to pass in the appropriate size information.
* Detect PCH model based on ISA bridge and save
into shared info for later use.
* On CougarPoint PCH systems, assign pipes via
special CPT registers
* Drop HasPlatformControlHub as PCH should be
based on more than just generation.
UserInterface:
- Add Clone() function to set of required virtuals. This asks the subclass
to create a new instance of its respective type.
{CommandLine,Graphical,Report}UserInterface:
- Implement the above function.
TeamDebugger:
- Add accessor for the currently active UI.
TargetHostInterface:
- Set correct request type when setting up the options for a team restart.
- Ask the TeamDebugger for its user interface and clone it in order to fill
in that aspect of the debug options. This fixes a regression introduced in
commit 880a64, which inadvertently resulted in team restarts no longer
working.
* Wait evaluation is done considering both position
and buffer size.
* Set back position to 0 after seeking.
* Simplify EvaluatePosition to take advantage of inheritance.
* Use back position to determine the current size of the buffer.
* Add more debug tracing.
* Other minor fixes.
* Implement Open/Close mechanism.
* Implement SetBuffer.
* Implement timeout handling.
* Improve Seek mechanism, this is now working by locking the
thread until the backend call SeekCompleted.
* Moved data locking in the internal buffer class, includes handling
of backend writes.
* Takes advantage of inheritance for getting the size. The choice is
made depending on the flags. This allow the implementer to easily
return a custom size by reimplementing GetSize. At the same time
a plain BAdapterIO can still have it's total size set, but the behavior
will change depending it's mutable or not.
* Some decisions are now made by considering everything in absolute
values.
* Other minor fixes.
* This is by default provided using a relative buffer. When the
client request a seek over the range we currently have, we will
ask the backend with a SeekRequested. When the backend operation
ended successfully, the client is required to call SeekCompleted
before to return. This will cause the offset to change and the
buffer is cleaned as result. Next data received will be considered
to be at a position equal to the offset plus the relative position.
- Add subfolder src/kits/debugger which contains the debugger's core
functionality and lower layers. Correspondingly add headers/private/debugger
for shared headers to be used by clients such as the Debugger application
and eventual remote_debug_server. Adjust various files to account for
differences as a result of the split and moves.
- Add libdebugger.so to minimal Jamfile.
* This class is provided as a safe multithreaded communication channel
between a BMediaIO-like interface and a Read/Write backend.
* Includes internal buffering and can be used to provide multithreaded
edit of the data.
* Current limitations include missing BOutputAdapter and
correct timeout handling.
* Future plans provide a BRemoteAdapterIO that using ports
and areas allow to easily send big data between processes.
- Messages that expect a reply are now tagged with a unique ID field to
indicate that expectation to the receiving socket messenger.
- The messenger now maintains a map of received reply IDs and their
corresponding messages, along with a message queue of other unsolicited
replies.
- After successfully connecting, the messenger now spawns a thread
whose sole responsibility is receiving and parsing all incoming messages,
and consequently sorting them into the aforementioned data structures based
on the presence of the reply ID. Callers who are awaiting either replies or
other messages are signalled appropriately via a semaphore. This allows
multiplexing of both types of messages on the same socket.
- Introduces new network API class BSocketMessenger, allowing one to send
and receive BMessages across a network socket in a BMessenger-like
fashion. Still very much WIP, hence currently not exposed via public headers.
Based partly on previous work by Axel.
* Add function core_dump_write_core_file(). It writes a core file for
the current thread's team. The file format is similar to that of
other OSs (i.e. ELF with PT_LOAD segments and a PT_NOTE segment), but
most of the notes are Haiku specific (infos for team, areas, images,
threads). More data will probably need to be added.
* Add team flag TEAM_FLAG_DUMP_CORE, thread flag
THREAD_FLAGS_TRAP_FOR_CORE_DUMP, and Team property coreDumpCondition,
a condition variable available while a core dump is progress. A
thread that finds its flag THREAD_FLAGS_TRAP_FOR_CORE_DUMP set before
exiting the kernel to userland calls core_dump_trap_thread(), which
blocks on the condition variable until the core dump has finished. We
need the team's threads to stop so we can get their CPU state (and
have a generally unchanging team state while writing the core file).
* Add user debugger message B_DEBUG_WRITE_CORE_FILE. It causes
core_dump_write_core_file() to be called for the team.
* Dumping core as an immediate effect of a terminal signal has not been
implemented yet, but that should be fairly straight forward.
