FS interface. Adjusted old hooks, but didn't add the new ones yet. The
module builds now at least.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20235 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Renamed a few parameters of the FS module hooks:
- *file in the attribute functions to *vnode
- v to vnode
- I could barely restrain myself from renaming the "_*" parameters. I
understand this marks return parameters, but I'd prefer a nicer prefix
or suffix (that doesn't makes you think this is a private/internal
identifier) like "out", "ret", "return", "result", or something similar.
I'd also like to propose renaming {read,write}_link() to
{read,write}_symlink(). Er, and do we need write_link() at all?
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20226 a95241bf-73f2-0310-859d-f6bbb57e9c96
This fixes bug #242. The value is currently stored in a separate file.
* Removed some unused codes from ServerProtocol.h.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20188 a95241bf-73f2-0310-859d-f6bbb57e9c96
The first use is to let the kernel decide what the preferred syscall mechanism is at boot time and copy the
appropriate user space code there. Can be used for routines the kernel can decide best how to use (memcpy, some
timing routines, etc).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20161 a95241bf-73f2-0310-859d-f6bbb57e9c96
the new cpuid stuff was apparently exacerbating an existing problem where various bits of low level
cpu code (specifically get_current_cpu) weren't really initialized before being used. Changed the
order to set up a fake set of threads to point each cpu at really early in boot to make sure that at
all points in code it can get the current 'thread' and thus the current cpu.
A probably better solution would be to have dr3 point to the current cpu which would then point to the
current thread, but that has a race condition that would require an int disable, etc.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20160 a95241bf-73f2-0310-859d-f6bbb57e9c96
updated the mesa software addon to work again (maybe would need more work)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20137 a95241bf-73f2-0310-859d-f6bbb57e9c96
Now two complete tss structures exist within the per-cpu structure. Instead
of having to create a seperate area per each one, initialize them in place.
Also, the old mechanism to getting all of the cpus to get initialized was
subtly broken, but still managed to work. Now, just force all the cpus to
initialize at boot, which makes the actual swapping of esp0 somewhat simpler.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20131 a95241bf-73f2-0310-859d-f6bbb57e9c96
* recursive_lock_unlock() now returns a void to mirror it's counterpart better;
use recursive_lock_get_recursion() if you're interested in the lock depth.
* switch_sem(), and release_sem() now don't do anything anymore in kernel startup
mode.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20099 a95241bf-73f2-0310-859d-f6bbb57e9c96
for one quantum wasn't really a good idea, as this could get quite expensive for the thread
(depending on the system load, it might have taken a long time until the thread was scheduled
again, no matter what priority it was).
Also, calling thread_yield() in a loop would have taken 100% CPU time.
Now, we sort the thread into the queue as with any other thread, but we'll ignore it once.
This now guarantees an actual context switch, as well as a much fairer rescheduling policy
for threads calling that function.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20077 a95241bf-73f2-0310-859d-f6bbb57e9c96
at boot, per cpu, detect the cpu, pull down all the relevant cpuid bits and
save them into the per-cpu structure. Changed most of the code scattered here
and there that reads the cpuid to use a new api, x86_check_feature, which looks
at the saved bits.
Also changed the system_info stuff to read from these bits.
While i was at it, refreshed all the bits to be current.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20072 a95241bf-73f2-0310-859d-f6bbb57e9c96
Replaced the _kern_null syscall with _kern_is_computer_on.
is_computer_on_fire is a bit harder, since it returns a float from kernelland, which
at the moment isn't supported in haiku.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20069 a95241bf-73f2-0310-859d-f6bbb57e9c96
* replaced new[] with malloc()/realloc() where appropriate - since we're messing with
the bits anyway, this makes the code slightly faster.
* however, we might want to throw some std::bad_alloc exceptions to deal correctly with
low memory situations.
* cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20065 a95241bf-73f2-0310-859d-f6bbb57e9c96
this fixes bug #1005. As a result, the Disks icon will now appear in file panels
when you change that setting with a panel open.
* _ObserverList is now in the BPrivate namespace (and renamed to ObserverList).
* its BHandler map is now only temporarily used for handlers that do not belong to
a looper yet; when BHandler::SendNotices() is called, they will be transferred
into the BMessenger map.
* Invalid messengers are now removed from the map when encountered.
* Added TODO comments about a possible reference counting if a handler is added
twice to a list (right now, this will be ignored).
* All {Start|Stop}Watching() methods are now more or less safe to be used in low
memory situations (adding some items to the map can still throw an exception...).
* Renamed BHandler::InitData() to _InitData().
* Some refactoring and cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20029 a95241bf-73f2-0310-859d-f6bbb57e9c96
* we now always flush the TLBs after having unmapped some pages.
* vm_soft_fault() could traverse to a source cache while it was being collapsed
by vm_cache_remove_consumer() - this is now no longer possible as the latter
marks the cache as busy when doing so, and the former now tests this flag and
locks the cache (via the new fault_acquire_locked_source() function).
* if fault_acquire_locked_source() fails with B_BUSY, the current cache is locked
again, and tested again for the page - as it might have been moved upwards to it
with the destruction of its former source.
* The cache delivering the page for vm_soft_fault() is now locked until the end;
it can no longer go away before having actually mapped the page into the area.
* This also fixes the issue where pages would get lost as vm_soft_fault() put the
page in the active list, no matter if its cache still existed.
* Also, we now keep a reference of to a cache in case a dummy page is inserted; this
makes again sure that it doesn't go away during the execution of vm_soft_fault()
(which could even add this page to the free list...).
* divided vm_soft_fault() into several smaller functions which should make it much
more readable.
* Added a "cache_chain" KDL command that dumps the whole chain until the bottom
when giving a pointer to a vm_cache as parameter.
* now usually call vm_cache_acquire_ref() before map_backing_store(), even though
it shouldn't be really needed (I added it for debugging purposes).
* Some minor cleanup.
* NOTE: a major problem still persists: when removing a vm_cache, it's possible
that some of its pages are still mapped, and there is currently no mechanism
to get rid of these mappings! I've added TODO comments into vm_cache.c where
appropriate.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20028 a95241bf-73f2-0310-859d-f6bbb57e9c96
process group. This fixes bug #996.
* As a result, the process group stuff and wait_for_child() got much simpler;
get_death_entry() and update_wait_for_any() could go away completely.
* If a team goes away, all of its children are now "reparented" to the kernel team,
instead of the team's parent - this follows common implementations (and POSIX if
I understand it correctly), but not BeOS anymore. The OpenGroup Base says this
about this topic: "If a parent process terminates without waiting for all of its
child processes to terminate, the remaining child processes shall be assigned a
new parent process ID corresponding to an implementation-defined system process."
* We wait too long in wait_test_4 which at least puts us on par with Linux; see
comment in _user_setpgid().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@20010 a95241bf-73f2-0310-859d-f6bbb57e9c96
C style ones, as this is a C header, too (and a very basic one).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19984 a95241bf-73f2-0310-859d-f6bbb57e9c96
feel free to change that ;-)
* Cleaned up existing headers.
* Coding style guide update to BBufferIO (renamed m_* members to f*).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19972 a95241bf-73f2-0310-859d-f6bbb57e9c96
with PostMessage() in case the message queue is full.
Some notes:
* for synchronous replies, we don't use this mechanism yet, but it could be
extended to do that as well.
* the code looks so complicated because we need a way to access the looper's
queue without locking it (to prevent deadlocks); like Dano's solution, I've
abused BTokenSpace to store a BDirectMessageTarget with a BHandler.
* we also need to decouple the lifetime of a looper's queue from its target,
as we cannot lock the looper, and therefore, can't guarantee it stays valid
as long as we're accessing it outside of BLooper.
* init_clipboard() now needs to be done after the global constructors have
been called - since sending messages now needs gDefaultTokens to be initialized.
Since this is done per image, it shouldn't cause any troubles, though.
* some minor cleanup, removed unused _msg_cache_cleanup_() and friends.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19968 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Got rid of unused BLooper members
* renamed fTaskID to fThread
* Removed private and deprecated AddLooper()/RemoveLooper()/... stuff; BLooper is now
directly calling BLooperList methods.
* Got rid of extensive and useless comments
* Made a few TODOs more clear
* Merged InitData() and InitData(...) to _InitData(...)
* BLooper::Team() now uses BPrivate::current_team(), sTeamID is gone now.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19966 a95241bf-73f2-0310-859d-f6bbb57e9c96
* BLooper::AddMessage() is now using this method to determine wether or not to
update its looper thread.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19956 a95241bf-73f2-0310-859d-f6bbb57e9c96
Use the size of the struct instead of checking a pointer that is never NULL...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19935 a95241bf-73f2-0310-859d-f6bbb57e9c96
It is supposed to be cleaner and more object oriented. It also adds some features (like a string getter for the interface) that were appearantly left out in the Be implementation.
It is currently built as a small static library from src/libs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19913 a95241bf-73f2-0310-859d-f6bbb57e9c96
Some files renamed. Won't build yet with our usb_raw driver due to different namings. classes need to be B-prefixed anyway. USBKit.h needs to be split like in zeta as well.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19901 a95241bf-73f2-0310-859d-f6bbb57e9c96
some Pentium 200 MMX pretend to support MTRRs.
This should fix bug #553.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19899 a95241bf-73f2-0310-859d-f6bbb57e9c96
* libprint based drivers can now show a preview window and show progress
window while printing contributed in part by Hartmut Reh.
* Libprint and PCL6 driver bug fixes.
* Code clean-up (removed code duplications, coding style, copyright text)
Builds under Linux. Not tested under BeOS.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19882 a95241bf-73f2-0310-859d-f6bbb57e9c96
this fixes bug #227 again (which I recently opened again accidently).
* We actually switched the last consumer's source without having acquired its
lock! This fixes some rare random app crashes as well as potential kernel
crash ("cache to be deleted still has consumers").
* Some more comments to explain why things are done and can be done the way they
are done :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@19878 a95241bf-73f2-0310-859d-f6bbb57e9c96
