* Introduce a system-wide localization catalog used for strings hidden deep in some libraries. Add special API to get it.
* string_for_size is the first to make use of this system wide catalog. This allows to have a fully localized DriveSetup.
* As a side effect, tracker also uses it. It now requires liblocale.so.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36175 a95241bf-73f2-0310-859d-f6bbb57e9c96
and the transport addon. The actual command use as pipe is retrieved from the PPD that can be selected
at printer creation time.
Currently PPD selection is not shown (as the PPD directory is not available) and therefore the pipe
will not be inserted.
This still needs a bit of TLC, so hope to commit the last changes to fully support this later this week.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36173 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented a tiny bit more sophisticated version of
estimate_max_scheduling_latency() that uses a syscall that lets the scheduler
decide.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36170 a95241bf-73f2-0310-859d-f6bbb57e9c96
locks.
* Added syscalls for a new kind of mutex. A mutex consists only of an int32 and
doesn't require any kernel resources. So it's initialization cannot fail
(it consists only of setting the mutex value to 0). An uncontended lock or
unlock operation can basically consist of an atomic_*() in userland. The
syscalls (when the mutex is contended) are a bit more expensive than semaphore
operations, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36158 a95241bf-73f2-0310-859d-f6bbb57e9c96
to parts of the caret being inverted:
* instead of always inverting the caret rect, we now invalidate when the
caret should be hidden
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36153 a95241bf-73f2-0310-859d-f6bbb57e9c96
Invoke() wasn't called the first time you grab a slider and slide it all the way to the left.
Thanks for the test case.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36145 a95241bf-73f2-0310-859d-f6bbb57e9c96
* added a TODO questioning the closing master and slave in openpty() when applying window size fails.
* added TIOCSCTTY as a TTY ioctl code, the caller become controlling TTY. Review comments are welcome.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36105 a95241bf-73f2-0310-859d-f6bbb57e9c96
platforms it's the same value, but we actually want type int, not long.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36072 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added new thread flag THREAD_FLAGS_ALWAYS_RESTART_SYSCALL. If set, it forces
syscall restart even when a signal handler without SA_RESTART was invoked.
* Fixed sigwait(): If one of requested signals wasn't already pending it would
never wake up. Also, the syscall always needs to be restarted, if interrupted
by another signal.
* Renamed a bunch of the POSIX signal function implementations which did return
an error code directly (instead via errno). Added correct POSIX functions
where needed.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36054 a95241bf-73f2-0310-859d-f6bbb57e9c96
return it.
* lock_memory_etc(): On error the VMAreaWiredRange object could be leaked.
* [un]lock_memory_etc(): Call VMArea::Unwire() with the cache locked and
explicitly delete the range object after unlocking the cache to avoid
potential deadlocks.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36035 a95241bf-73f2-0310-859d-f6bbb57e9c96
Since the requirement is that the area's top cache is locked, allocating
memory isn't allowed.
* lock_memory_etc(): Create the VMAreaWiredRange object explicitly before
locking the area's top cache.
Fixes #5680 (deadlocks when using the slab as malloc() backend).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36033 a95241bf-73f2-0310-859d-f6bbb57e9c96
* _user_map_file(), _user_unmap_memory(): Verify that the address (if given) is
page aligned.
* Reworked memory locking (wiring):
- VMArea does now have a list of wired memory ranges and supports waiting for
a range to be removed.
- vm_soft_fault():
- Added "wirePage" parameter that, if given, makes the function wire the
page and return it.
- Added "wiredRange" parameter (for calls from lock_memory_etc()) and made
sure we never unmap wired pages. This could e.g. happen when a page from a
lower cache was read-mapped and a write fault occurred. Now in such a
situation the function waits for the page to be unwired and restarts.
- All functions that manipulate areas in a way that could affect wired ranges
do now either require the caller to make sure there are no wired ranges in
the way or do that themselves. Added a few wait_if_*_is_wired() helper
functions for that purpose.
- lock_memory_etc():
- Does now also work correctly when the range spans more than one area.
- Adds VMAreaWiredRanges to the affected VMAreas and retains an address
space reference (so that the address space won't be deleted as long as a
wired range exists).
- Resolved TODO: The area's caches are now locked when
increment_page_wired_count() is called.
- Resolved TODO: The race condition due to missing locking after looking up
the page mapping is now prevented. We hold the cache locks (in case the
page is already mapped) and the new vm_soft_fault() parameter allows us
to get the page wired.
- unlock_memory_etc(): Changes symmetrical to those in lock_memory_etc() and
resolved all TODOs.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36030 a95241bf-73f2-0310-859d-f6bbb57e9c96
implementations of the other hooks. This way one can easily detect/handle
otherwise unhandled events.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35964 a95241bf-73f2-0310-859d-f6bbb57e9c96
correctly later in another way.
Removing this code should also fix ticket #3103.
Use the width of the Bitmaps instead of fixed values.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35962 a95241bf-73f2-0310-859d-f6bbb57e9c96
in the AGG header. Reused the AGG code were applicable and implemented a lot
more features. The Multiply and PreMultiply meaning is reversed with respect to
AGG, but follows the mathematical meaning. Added type_code
B_AFFINE_TRANSFORM_TYPE to TypeConstants.h and let BAffineTransform derive from
BFlattenable.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35958 a95241bf-73f2-0310-859d-f6bbb57e9c96
* BDebugMessageHandler: Interface with hooks for handling of debug messages.
* BDebugContext: Essentially a C++ wrapper for struct debug_context, with
handy methods for controlling a debugged team.
* BTeamDebugger: Proxy for a debugged team. Derived from BDebugContext.
* BDebugLooper: Wraps a main debug message loop. Any number of BTeamDebuggers
can be added and associated with BDebugMessageHandlers.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35953 a95241bf-73f2-0310-859d-f6bbb57e9c96
Added fields for temporary storage of the debug registers dr6 and dr7 to the
arch_cpu_info structure. The actual registers are stored at the beginning of
x86_exit_user_debug_at_kernel_entry() and read in
x86_handle_debug_exception().
The problem was that x86_exit_user_debug_at_kernel_entry() itself overwrote
dr7 and, if kernel breakpoints were enabled, dr6 could be overwritten anytime
after. So x86_handle_debug_exception() would find incorrect values in the
registers (definitely in dr7) and thus interpret the detected debug condition
incorrectly. Usually watchpoints were recognized as breakpoints.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35951 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Adapted libtracker.so, DriveSetup and Installer to use the shared version.
* The new version uses the correct units (KiB instead of KB and so on).
* Use the correct units in a few other prominent places, where
string_for_size() could not be used.
Should resolve a major part of #5378.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35935 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Repurposed the FollowLink cursor as CreateLink cursor.
* Created a new FollowLink cursor based on a design by Justin Stressman, thanks!
It compiles and I proof-read the commit, otherwise I didn't test, yet.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35922 a95241bf-73f2-0310-859d-f6bbb57e9c96
arch_debug_registers instead.
* Call arch_debug_save_registers() on all CPUs when entering the kernel
debugger.
* Added debug_get_debug_registers() to return a specified CPU's saved
registers.
* x86:
- Replaced the previous arch_debug_save_registers() implementation. Disabled
getting the registers via the gdb interface for the time being.
- Fixed the "sc", "call", and "calling" commands to also work for threads
running on another CPU.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35907 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added BShape::ArcTo() and BShapeIterator::IterateArcTo(), using a previously
unused virtual slot. (Added the symbols for binary compatibility for GCC2
and GCC4.)
* Added operator=(), operator==() and operator!=() to BShape.
* Added BShape::BezierTo() version taking three points, which is sometimes
more convenient.
* Added the four new shape data ops OP_LARGE_ARC_TO_CW, OP_LARGE_ARC_TO_CCW,
OP_SMALL_ARC_TO_CW and OP_SMALL_ARC_TO_CCW. For a single arc, provided the
radius is large enough, there are four possibilities to draw the arc, these
are controlled by the two boolean flags to ArcTo() and mapped to the new
commands accordingly.
* Some style cleanup in Shape.cpp (sorry for mixing it up, but it gets
worse below...)
* Added ShapeTest to src/tests/servers/app.
* Changed the way BShapes are transformed from view to screen space in the
app_server. For arcs, it would be nontrivial to apply a proper transformation,
it's much easier to let AGG take care of it. This affects ServerPicture as
well.
* Wrapped iterating the BShape into try/catch blocks in ShapeIterator. But
I really don't understand the purpose of the class in the first place.
Maybe it can now be dropped, since coordinates don't have to be transformed
in place anymore.
* Refactored copy&paste shape iteration code in Painter. The transformation
to screen space happens there.
* Since RemoteDrawingEngine needed to be adopted anyway, I also updated
it for the new DrawString() with offsets version. But the client still needs
to be adapted.
* Style cleanup in Painter.h
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35905 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Let the AddHours(), Add*() return itself, so that they can be chained.
* Made the previous *Name() methods static and added non-static versions that
take the day/month of the object.
* Make BDateTime::Date/Time() return references (const or non-const).
* Fixed the BDateTime comparison operators.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35894 a95241bf-73f2-0310-859d-f6bbb57e9c96
support file creation.
* Extended open() and open_from() to support O_CREAT to create files.
open_from() has got an optional "permissions" parameter for that purpose.
* Fixed errno. It would crash when being used. Also changed the POSIX functions
to return their error code via errno as expected.
* Added writev().
* FAT file system:
- Added support for reading long file names.
- Added support for creating files (8.3 name only) and writing to them.
- Enabled scanning partitions with it.
* Boot loader menu:
- Enabled the "Reboot" menu item unconditionally.
- Added "Save syslog from previous session" menu item to the debug menu.
Currently saving the syslog to FAT32 volumes is supported.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35882 a95241bf-73f2-0310-859d-f6bbb57e9c96
client provide the array size. Added version that doesn't take a string length
for convenience.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35866 a95241bf-73f2-0310-859d-f6bbb57e9c96
of locations, one for each glyph.
* Added a test for the new functionality.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35865 a95241bf-73f2-0310-859d-f6bbb57e9c96
* build shared and static libraries for libtiff, cleaned libtiff sources
* TIFFTranslator now uses this library
I used 3.8 as library version as it seems the API didn't change since then
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35857 a95241bf-73f2-0310-859d-f6bbb57e9c96
received, but if the signal was in the thread's signal block mask, it would
not be handled. Added thread::sig_temp_enabled, an additional mask of not
blocked signals, which is set by sigsuspend() and evaluated and reset by
handle_signals(). Fixes #5567.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35836 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The kernel syslog ring buffer is no longer emptied by the syslog sender
thread. Instead we only drop the oldest data from the buffer when we're
writing to it and there's not enough free space in it.
Advantages: We drop old data rather than the most recent data when the buffer
is full. The "syslog" KDL command has more data available now. So the odds
are that kernel syslog messages not written to disk yet are at least still
in the kernel buffer.
* Changed dprintf_no_syslog() semantics: Now it writes to the syslog, but
doesn't notify the syslog sender thread.
boot loader:
* Added the ring_buffer implementation and a dummy user_memcpy().
* bios_x86: Moved the syslog stuff from serial.{cpp,h} to debug.{cpp.h}.
* Moved the debug options from the "Select safe mode options" menu to a new
"Select debug options" menu.
* Added option "Enable debug syslog" to the new menu (ATM available on x86
only). It allocates a 1 MB in-memory buffer for the syslog for this session
in such a way that it can be accessed by the boot loader after a reset.
* Added item "Display syslog from previous session" to the new menu, doing
what its name suggests.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@35816 a95241bf-73f2-0310-859d-f6bbb57e9c96
