also only provide a default name for partition containing a file system
fix #17958
Change-Id: Ib5a8928dc5272a400a99aa05b792201f3a6a2c7d
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5705
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
This takes care of making sure the dirent buffer is properly aligned,
which it needs to be on some platforms (SPARC, ARM, etc.)
Change-Id: I9a6352b1e654c090a200770d51f96511ee024a99
only scsi_disk checks the actual value, other drivers take the logical block size.
This change reports the physical block size from the disk rather than the block
size used by IDE/SATA/SCSI commands. On typical modern SATA disks, the SATA
commands will use 512 byte blocks, but the disk will actually read and write
4K blocks internally. This is only of importance for partition alignment for DriveSetup,
and is independant of file systems or partitioning systems. This could also influence
the recommended block size for some file systems.
Change-Id: Id0f2e22659e89fcef64c1f8d04f81cd68995e01f
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5667
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Adrien Destugues <pulkomandy@pulkomandy.tk>
This will give the same result as fs_stat_dev, so the filesystems will
have the same name everywhere.
Change-Id: Ic684142efaeb2c16b393f3f3e5c9c3010a054b30
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5636
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
The respective files can be found in the FreeBSD source tree at:
- lib/libstdthreads/call_once.c
- lib/libstdthreads/cnd.c
- lib/libstdthreads/mtx.c
- lib/libstdthreads/threads.h
- lib/libstdthreads/tss.c
Missing is support for PTHREAD_DESTRUCTOR_ITERATIONS.
Change-Id: I7a6c79954f36195eadd1351d308c21a001192232
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5675
Reviewed-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
This avoids introducing an entirely custom hook in FUSE.
It uses the ioctl hook in an unconventional way (calling it with no
valid fuse_file_info) but this can be fixed if a filesystem requires it
(by opening a file handle on /, doing the ioctl, then closing again).
An updated version of fusesmb-haiku is available and confirmed working:
https://github.com/haikuarchives/fusesmb-haiku
Change-Id: If1268113874363fa035e5340be75e9f5198216d6
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5199
Reviewed-by: Adrien Destugues <pulkomandy@pulkomandy.tk>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Not referenced in any Jamfile, does not compile, untouched since
2003 except for a few coding style and cppcheck fixes. The functionality
is implemented elsewhere in the disk device manager and userland
filesystem add-ons for DriveSetup.
Change-Id: I5ebe125931c8d4410c2d335f9d6c0e32008f038b
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5637
Reviewed-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
* 90% of our logs start with some context on what is
generating a log message (thing:)
* Things following this logging model however do "thing [time"
which is inconsistent
* Being consistent will allow us to start scanning logs in a
smart way and try to analyze patterns of what is throwing
errors, etc in an automatic way.
aka /^(service/driver/etc)\:/
Change-Id: I1ef2df4f17f70f858a485554a4e8a3f87f1a69c8
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5568
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: Oscar Lesta <oscar.lesta@gmail.com>
Reviewed-by: Adrien Destugues <pulkomandy@pulkomandy.tk>
This smart pointer is designed to help with putting some explicitness and
safety around the case where someone will use their own object that implements
the BDataIO interface to store the body of a network request. By default,
BDataIO objects do not require or enforce thread safety. Since accessing these
unsynchronized objects between two threads is undefined behavior, it should be
explicitly discouraged.
The BExclusiveBorrow/BBorrow smart pointer helper helps solve that by enforcing
the limitations on using an unsynchronized object in two threads. When used
correctly, there is a runtime check on incorrect use by the developer. This
should help write better code.
The design is based on shared_ptr, including having an admin block akin the
control block, that manages the internal object. This type-erased admin block
has the advantage that it allows the owner to have a different type than the
borrower. It also handles cases where the lifetime of the borrower is longer
than the owner: the borrower can continue to use the object until they want to
return it, after which it will be cleaned up. This will make it possible to do
some fire and forget pattern in the network services kit, where someone may
just wants to create a file and borrow it to the network request, and care
about further processing the file in the future.
Change-Id: Ie9b7e7472c868b60f663b4db4fa449d421e447eb
* set PXN for all page tables below KERNEL_BASE
* also set PXN for physical page mapper
PXN, Privileged execute-never
When the PXN bit is 1, a Permission fault is generated if the processor
is executing at PL1 and attempts to execute an instruction fetched from
the corresponding memory region.
Change-Id: I3056cbed151004ac9edfbc81ebeada328aeb603c
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5607
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Use the Privileged Only Thread ID Register aka TPIDRPRW to store
the current thread pointer.
The Privileged Only Thread ID Register is only accessible
in privileged modes, and is read/write.
see: ARMv7 Architecture Reference Manual,
section B3.12.46 CP15 c13 Software Thread ID registers
Change-Id: I5273bee8a80b78cdc547b2f6c96632d120eb3d55
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5608
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
This was a holdover from BeOS, which did this as inline assembly.
We do not on any platform other than 32-bit x86, and even there
we may have preferred to do things a little differently on non-BeOS
ABIs.
Most things ported from other systems, or even native apps, are going to
use _Thread_local variables anyway, which will bypass this system
altogether.
This takes an int32 (e.g. B_MINI_ICON or another constant) and
then returns a BSize scaled appropriately, the same as ComposeSpacing()
does already for the *_SPACING constants.
This will be used to replace icon size computations throughout the tree.
GICv2 can use interrupt numbers up to 1019:
* 0-15 are SGIs aka ICIs
* 16-31 are PPIs
* 32-1019 are SPIs
Change-Id: I1c19be77105683da3f6988a5607b14dc10a899db
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5565
Reviewed-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Now that we have locale_t, we can use the musl versions of these functions.
This also fixes a licensing issue: the strptime implementation had an
advertising clause (although in upstream *BSD it was removed, so we
likely could have managed to remove it anyway.)
These allow for additional messages about the progress/status of the request.
For now, the messages are sent unconditionally, though it may be reasonable to
in the future switch to sending them only when enabled.
Change-Id: Ic45a0055037af02c689494fa5ce0acd03592ad7e
... and B_WORKSPACES_CHANGED too.
hrev50148 propagated B_SCREEN_CHANGED messages to
children allowing them to respond to screen changes
fixing #8035 back in 2016.
This does the same thing for workspace messages only
I spelled propagate correctly this time.
Add private _PropagateMessageToChildViews() convinience
method to BWindow to do this work.
Call PostMessage() instead of calling MessageReceived()
directly which can work better in certain circumstances.
Change-Id: I5978c3fe674bbe75d9eafb7afb654a49ee3e0c11
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5516
Reviewed-by: Axel Dörfler <axeld@pinc-software.de>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
This fixes a bug in the HttpAuthTest, and in general, moves responsibility of determining
the shape and size of the content to the right place.
Still to do is to fix the case where there really is a variable length content. This will
now probably error out as a connection closed error.
Change-Id: I13c20028e834cc9af8c7bc1d7d7613bf60838e64
should help with #17664
register change from Tahiti for #17377
Change-Id: I52b9691cd6a04b58b70e905bc29e803f06936789
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5526
Reviewed-by: John Scipione <jscipione@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
uselocale now attempts to create a backend and a databrige.
If the attempt fails due to a missing libroot-addon-icu, uselocale
does nothing (to support applications calling uselocale during
startup to enforce the C locale).
Else, uselocale will fail with ENOMEM.
LocaleBackend::CreateBackend() has been modified to return a status_t
that indicates whether NULL is returned due to out of memory (B_NO_MEMORY)
or due to being unable to load the ICU addon (B_MISSING_LIBRARY).
Change-Id: I0f62ebde5890364c64e6694ec58d38de43ec6841
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5505
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
