mirror of
https://review.haiku-os.org/haiku
synced 2025-01-31 18:56:49 +01:00
ba0c49863a
Change-Id: Ic8cc47394c9e49f05e30b5ba54ff70557b1e2c47 Reviewed-on: https://review.haiku-os.org/c/haiku/+/5237 Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
96 lines
2.5 KiB
ReStructuredText
96 lines
2.5 KiB
ReStructuredText
Raspberry Pi 4
|
||
##############
|
||
|
||
- http://raspberrypi.org
|
||
|
||
Hardware Information
|
||
====================
|
||
|
||
- ARMv8 Architecture (64-bit)
|
||
- Broadcom BCM2711 (SoC)
|
||
|
||
- Includes Quad ARM Cortex-A72 CPU @ 1.8 GHz
|
||
- Includes VideoCore VI GPU
|
||
|
||
- SD Card Storage
|
||
- 1, 2, 4 or 8 GB RAM
|
||
- Video Outputs
|
||
|
||
- 2x HDMI Video Output via micro-HDMI
|
||
- Composite Video Output
|
||
|
||
- Ethernet 10/100/1000 Mbit/s
|
||
- Wifi b/g/n/ac dual band 2.4/5 GHz
|
||
- Bluetooth 5.0
|
||
- 2x USB 2.0, 2x USB 3.0
|
||
|
||
Setting up the Haiku SD card
|
||
============================
|
||
|
||
The Raspberry Pi SD card generally uses the MBR file system layout
|
||
below. Partition 1 is all that is required to boot an OS.
|
||
|
||
- partition 1 – FAT32, bootable flag, type ‘ef’
|
||
- partition 2 – BeFS, Haiku filesystem, type ‘eb’
|
||
|
||
Boot Partition
|
||
--------------
|
||
|
||
Required Files
|
||
~~~~~~~~~~~~~~
|
||
|
||
- start4.elf: The GPU binary firmware image
|
||
- fixup4.dat: Additional code for the GPU
|
||
- bcm2711-rpi-4-b.dtb: FDT binary for the Raspberry Pi 4B
|
||
- bcm2711-rpi-400.dtb: FDT binary for the Raspberry Pi 400
|
||
- config.txt: A configuration file read by the Pi to start u-boot.bin
|
||
- u-boot.bin: u-boot loader for the Pi 4
|
||
- boot.scr: u-boot loader script for starting Haiku Loader
|
||
- uEnv.txt: configuration file for the boot.scr script
|
||
- haiku_loader.efi: Haiku Loader
|
||
|
||
Note: unlike previous Raspberry Pi models, there's no bootcode.bin on the
|
||
Raspberry Pi 4 as it's replaced by a boot EEPROM.
|
||
|
||
Optional Files
|
||
~~~~~~~~~~~~~~
|
||
|
||
- vlls directory: Additional GPU code, e.g. extra codecs.
|
||
- uEnv.txt: u-boot configuration script to automate boot.
|
||
|
||
Compiling Haiku and preparing SD card
|
||
=====================================
|
||
|
||
- Create your ARM work directory
|
||
``mkdir generated.arm; cd generated.arm``
|
||
- Build an ARM toolchain using
|
||
``../configure --build-cross-tools arm --cross-tools-source ../../buildtools``
|
||
- Build SD card image using ``jam -q -j6 @minimum-mmc``
|
||
- Prepare customized SD card using the ``rune`` tool. E.g. ``rune -b rpi4 -i haiku-mmc.image /dev/mmcblk0``
|
||
|
||
Booting
|
||
=======
|
||
|
||
1. SOC starts the boot EEPROM
|
||
2. Boot EEPROM runs start4.elf
|
||
3. start4.elf reads config.txt and start u-boot
|
||
4. u-boot.bin starts the Haiku loader
|
||
5. Haiku loader boots Haiku kernel
|
||
|
||
config.txt Options
|
||
------------------
|
||
|
||
::
|
||
|
||
uart_2ndstage=1
|
||
enable_uart=1
|
||
kernel=u-boot.bin
|
||
|
||
|
||
Additional Information
|
||
======================
|
||
|
||
- `Latest Raspberry Pi
|
||
firmware <http://github.com/raspberrypi/firmware/tree/master/boot>`__
|
||
- `config.txt options <http://www.elinux.org/RPiconfig>`__
|