dfu-programmer

dev-embedded/dfu-programmer/dfu_programmer-0.6.2.recipe

@@ -0,0 +1,71 @@
+SUMMARY="A Device Firmware Update based USB programmer for Atmel chips"
+DESCRIPTION="
+dfu-programmer is an implementation of the Device Firmware Upgrade class
+USB driver that enables firmware upgrades for various USB enabled (with the
+correct bootloader) Atmel chips.  This program was created because the
+Atmel "FLIP" program for flashing devices does not support flashing via USB
+on Linux, and because standard DFU loaders do not work for Atmel's chips.
+
+Check out the Atmel website for more information.  They are kind enough to
+provide generally correct specifications this implementation is based on.
+
+The project website is http://dfu-programmer.sourceforge.net and you can
+use that to check for updates.
+"
+HOMEPAGE="http://dfu-programmer.sourceforge.net"
+LICENSE="
+	GNU GPL v2
+"
+COPYRIGHT="
+    Weston Schmidt <weston_schmidt@alumni.purdue.edu>
+"
+SRC_URI="http://downloads.sourceforge.net/project/dfu-programmer/dfu-programmer/0.6.2/dfu-programmer-0.6.2.tar.gz" 
+SOURCE_DIR="dfu-programmer-0.6.2"
+CHECKSUM_SHA256="0120966a424dd98124962055750e90cbd6c7b6b0fbf5b187bf435daa0a24af65"
+REVISION="1"
+ARCHITECTURES="x86 x86_64"
+if [ $effectiveTargetArchitecture != x86_gcc2 ]; then
+	# x86_gcc2 is fine as primary target architecture as long as we're building
+	# for a different secondary architecture.
+	ARCHITECTURES="$ARCHITECTURES x86_gcc2"
+fi
+SECONDARY_ARCHITECTURES="x86"
+
+PATCHES="dfu-programmer-0.6.2.patch"
+
+PROVIDES="
+	dfu_programmer = $portVersion
+	cmd:dfu_programmer$secondaryArchSuffix = $portVersion
+"
+
+REQUIRES="
+	haiku$secondaryArchSuffix >= $haikuVersion
+	lib:libusb_1.0$secondaryArchSuffix
+"
+
+BUILD_REQUIRES="
+	devel:libusb_1.0$secondaryArchSuffix
+"
+
+BUILD_PREREQUIRES="
+	haiku${secondaryArchSuffix}_devel >= $haikuVersion
+	cmd:gcc$secondaryArchSuffix
+	cmd:ld$secondaryArchSuffix
+	cmd:automake
+	cmd:autoconf
+	cmd:make
+	cmd:pkg_config
+"
+
+BUILD()
+{
+	export PKG_CONFIG_LIBDIR=/system/develop/lib/x86/pkgconfig/
+	sh ./bootstrap.sh
+	runConfigure ./configure
+	make $jobArgs
+}
+
+INSTALL()
+{
+	make install
+}