SUMMARY="Device Firmware Upgrade Utilities"
DESCRIPTION="dfu-util is a host side implementation of the DFU 1.0 and DFU 1.1 \
specifications of the USB forum. DFU is intended to download and upload \
firmware to/from devices connected over USB. It ranges from small devices like \
micro-controller boards to mobile phones. Using dfu-util you can download \
firmware to your DFU-enabled device or upload firmware from it. dfu-util has \
been tested with the Openmoko Neo1973 and Freerunner and many other devices."
HOMEPAGE="http://dfu-util.sourceforge.net"
COPYRIGHT="2010-2012 Stefan Schmidt"
LICENSE="GNU GPL v2"
REVISION="1"
SOURCE_URI="${HOMEPAGE}/releases/dfu-util-$portVersion.tar.gz"
CHECKSUM_SHA256="55cbde9be12a212bd84bce9d1e63941d9a16139ed0d4912401367eba1502f058"
SOURCE_DIR="dfu-util-$portVersion"
PATCHES="dfu_util-$portVersion.patchset"

ARCHITECTURES="x86_gcc2"

PROVIDES="
	dfu_util = $portVersion
	cmd:dfu_suffix
	cmd:dfu_prefix
	cmd:dfu_util
	"
REQUIRES="
	haiku
	lib:libusb_1.0
	"

BUILD_REQUIRES="
	devel:libusb_1.0
	"
BUILD_PREREQUIRES="
	haiku_devel
	cmd:awk
	cmd:gcc
	cmd:make
	cmd:pkg_config$secondaryArchSuffix
	"

BUILD()
{
	CFLAGS=-D_BSD_SOURCE runConfigure ./configure
	make $jobArgs
}

INSTALL()
{
	make install
}