yann64/HuginPortable
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Add Hugin binaries

Browse Source
This commit is contained in:
yann64
2023-10-19 11:41:58 +02:00
parent 74829732ce
commit 7f3c404757
199 changed files with 55284 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

265
App/Hugin/doc/nona.txt Normal file
View File

@@ -0,0 +1,265 @@
############# Example Script ##########################
# for nona
#
# This document describes the script supported by the nona stitcher.
#
# Based on the PTStitcher documentation
#
#
# Only lines starting with 'p','o', i', 'm' or 'k' are read,
# so you can add comments and info as you like by using
# other line starting characters.
# The stitcher script must contain:
# one 'p'-line describing the output image (eg Panorama)
# one 'i'-line for each input image
# one 'm'-line for global options
#
# 'p'-line options
# w1000 width in pixels
# h600 height in pixels
# f0 projection format,
# 0 - rectilinear (for printing and viewing)
# 1 - Cylindrical (for Printing and QTVR)
# 2 - Equirectangular ( for Spherical panos), default
# 3 - full-frame fisheye
# 4 - Stereographic
# 5 - Mercator
# 6 - Transverse Mercator
# 7 - Sinusoidal
# 8 - Lambert Cylindrical Equal Area
# 9 - Lambert Equal Area Azimuthal
# 10 - Albers Equal Area Conic
# 11 - Miller Cylindrical
# 12 - Panini
# 13 - Architectural
# 14 - Orthographic
# 15 - Equisolid
# 16 - Equirectangular Panini
# 17 - Biplane
# 18 - Triplane
# 19 - Panini General
# 20 - Thoby Projection
# 21 - Hammer-Aitoff Projection
# v360 horizontal field of view of panorama (default 360)
# nPICT Panorama file format, one of:
# PNG png-format, 8 & 16 bit supported
# PNG_m png-format, multi-file, one image per file
# alpha layer with non-feathered clip mask at image border
# TIFF tiff-format, all tiff types supported (8,16,32 bit int, float, double)
# TIFF_m tiff-format, multi-file, one image per file
# alpha layer with non-feathered clip mask at image border
# TIFF_multilayer tiff-format, multi-image-file, all files in one image
# alpha layer with non-feathered clip mask at image border
# This filetype is supported by The GIMP
# JPEG Panoramic image in jpeg-format.
# JPEG_m jpeg-format, multi-file, one image per file
# without alpha layer, not suitable for further blending or fusing
# some more supported file formats (mostly only 8 bit support)
# PNM, PGM, BMP, SUN, VIFF
#
# Special options for TIFF output:
# n"TIFF c:NONE"
# c - select TIFF compression, possible options: NONE, LZW, DEFLATE
#
# Special options for TIFF_m and TIFF_multilayer output:
# n"TIFF c:NONE r:CROP"
# c - TIFF compression, possible options NONE, LZW, DEFLATE
# r - output only used image area (cropped output). The crop offsets
# are stored in the POSITIONX and POSITONY tiff tags
# p1 - save coordinate images (useful for further programs, like vignetting correction)
#
# Special options for JPEG output:
# n"JPEG q95"
# q - jpeg quality
#
# E12.3 exposure value for final panorama
# R1 stitching mode: 0: normal LDR mode, 1: HDR mode
# T"UINT8" bitdepth of output images, possible values are
# UINT8 - 8 bit unsigned
# UINT16 - 16 bit unsigned
# FLOAT - 32 bit floating point
# By default the bit depth of the input images is use.
#
# S100,600,100,800 Selection(left,right,top,bottom), Only pixels inside the rectangle
# will be rendered. Images that do not contain pixels in this area
# are not rendered/created.
#
# k1 Image number of reference image for photometric correction
#
# P"100 12" Parameters for tuning projection, number of parameters depends on projection
#
p w1000 h600 f0 v360 E12.3
# The 'i' lines describe input images (nona also accepts 'o' line image descriptions)
#
# f0 projection format,
# 0 - rectilinear (normal lenses)
# 1 - Panoramic (Scanning cameras like Noblex)
# 2 - Circular fisheye
# 3 - full-frame fisheye
# 4 - Equirectangular (spherical panos)
# 8 - orthographic fisheye
# 10 - stereographic fisheye
# 21 - Equisolid fisheye
# 20 - Fisheye Thoby (Nikkor 10.5)
# v82 horizontal field of view of image (required)
# y0 yaw angle (required)
# p43 pitch angle (required)
# r0 roll angle (required)
# a,b,c lens correction coefficients (optional)
# (see http://www.fh-furtwangen.de/~dersch/barrel/barrel.html)
# d,e initial lens offset in pixels(defaults d0 e0, optional).
# Used to correct for offset from center of image
# d - horizontal offset,
# e - vertical offset
# g,t initial lens shear. Use to remove slight misalignment
# of the line scanner relative to the film transport
# g - horizontal shear
# t - vertical shear
#
# Eev exposure of image in EV (exposure values)
# Er white balance factor for red channel
# Eb white balance factor for blue channel
#
# Vm vignetting correction mode (default 5):
# 0: no vignetting correction
# 1: radial vignetting correction (see Va, Vb, Vc, Vd options)
# 2: flatfield vignetting correction (see Vf option)
# 4: proportional correction: i_new = i / corr.
#
# default is additive correction: i_new = i + corr
# Both radial and flatfield correction can be combined with the
# proportional correction by adding 4.
# Examples: Vm1 - radial polynomial correction by addition.
# The coefficients Va, Vb, Vc, Vd must be specified.
# Vm5 - radial polynomial correction by division.
# The coefficients Va, Vb, Vc, Vd must be specified.
# Vm6 - flatfield correction by division.
# The flatfield image should be specified with the Vf option
#
# Va,Vb,Vc,Vd vignetting correction coefficients. (defaults: 1,0,0,0)
# ( 0, 2, 4, 6 order polynomial coefficients):
# corr = ( i + j*r^2 + k*r^4 + l*r^6), where r is the distance from the image center
# The corrected pixel value is calculated with: i_new = i_old + corr
# if additive correction is used.
# for proportional correction (Vm5): i_new = i_old / corr;
#
# Vx,Vy radial vignetting correction offset in pixels (defaults Vx0 Vy0, optional).
# Used to correct for offset from center of image
# Vx - horizontal offset
# Vy - vertical offset
#
# Vf filename of flatfield image.
# For additive correction the image will be used as it is.
# In the case of correction by division, the flatfield will be divided by
# its mean value.
#
# Ra,Rb,Rc,Rd,Re EMoR photometric model parameters. (defaults: 0,0,0,0,0)
#
# TrX,TrY,TrZ mosaic mode translation offsets.
#
# Tpy, Tpp orientation of remapping plane for translation offsets.
# (have no effect if TrX, TrY and TrZ are zero)
#
# S100,600,100,800 Selection(l,r,t,b), Only pixels inside the rectangle will be used for conversion.
# Original image size is used for all image parameters
# (e.g. field-of-view) refer to the original image.
# Selection can be outside image dimension.
# The selection will be circular for circular fisheye images, and
# rectangular for all other projection formats
#
# j0 stack number
#
# nName file name of the input image.
#
# Parameters in different images can be linked using '='
# followed by the image number starting with 0.
# Example 'v=0' sets horizontal field of view as in
# image number 0. You can only refer to images before the
# current image.
i f2 r0 p0 y0 v183 a0 b-0.1 c0 S100,600,100,800 n"photo1.jpg"
i f2 r0 p0 y180 v183 a0 b-0.1 c0 S100,600,100,800 n"photo1.jpg"
# 'm'-line options
# ----------------
# Set mode for stitcher, not required
#
# i2 Set interpolator, See <http://www.fh-furtwangen.de/~dersch/interpolator/interpolator.html>
# one of:
# 0 - poly3 (default)
# 1 - spline16,
# 2 - spline36,
# 3 - sinc256,
# 4 - spline64,
# 5 - bilinear,
# 6 - nearest neighbor,
# 7 - sinc1024
#
m i2
# 'v'-line options
# ----------------
# Indicate i-line parameters to optimise
# nona ignores all 'v' lines, these lines are used by autooptimiser
# (a,b,c,d,e,v,r,p,y geometric parameters) and vig_optimize
# (Eev,Er,Eb,Va,Vb,Vc,Vd,Vx,Vy,Ra,Rb,Rc,Rd,Re photometric parameters)
#
# Optimization variables are listed together with the image number
# starting at 0. There can be several v-lines.
#
# y0 Optimize yaw in image 0
# p1 Optimize pitch in image 1
# r2 Optimize roll in image 2
# v0 Optimize field of view in image 0
#
# If a image has a parameter linked to another image only
# need to optimize the master.
#
v v0 r0 p0 r1 p1 y1
# 'k'-line options
# ----------------
# Optional image masks are described by a 'k' line
#
# i2 Set image number this mask applies to
#
# t0 Type for mask:
# 0 - negative (exclude region)
# 1 - positive (include region)
# 2 - negative, stack aware (exclude region from stack)
# 3 - positive, stack aware (include region from stack)
# 4 - negative, lens (exclude region from all images of same lens)
#
# p"1262 2159 1402 2065 1468 2003" List of node coordinates
# Coordinates are in pairs, at least three pairs are required
k i2 t0 p"1262 2159 1402 2065 1468 2003"
# 'c'-lines
# ----------------
# Control point lines
# nona ignores all 'c' lines, these lines are used by autooptimiser
#
# One line per point pair
# about one pair of points per image per variable being optimized.
# The more variables being optimized the more control points needed.
#
# n0 first image
# N1 second image
# x1066.5 first image x point position
# y844.333 first image y point position
# X239.52 second image x point position
# Y804.64 second image y point position
# t0 type of control point (optional)
# 0 - normal (default)
# 1 - optimize horizontally only
# 2 - optimize vertically only
# 3+ (all other numbers) - straight line
c n0 N1 x1066.5 y844.333 X239.52 Y804.64 t0