Tested with VMWare Workstation Pro 17.6.0 with Haiku x86_64 hrev58201.
To test, had to manually open the .vmx file associated with the VM and added the line:
ethernet0.virtualDev = "vmxnet3"
Change-Id: Ic76dcc61583707345bee46624814a38f66eb4f9f
Reviewed-on: https://review.haiku-os.org/c/haiku/+/8438
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
It helps to simplify to view difference and apply patches.
No functional changes.
Change-Id: Ia29368eceaeb3306990c09da77c4527eff87c72a
Reviewed-on: https://review.haiku-os.org/c/haiku/+/7932
Haiku-Format: Haiku-format Bot <no-reply+haikuformatbot@haiku-os.org>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
It's now at HaikuArchives and supplied in a package at HaikuPorts.
EXR images are rare and mostly used in pretty specific cases, so it
isn't re-added to the default install.
Catalogs are left in-tree until they are purged from Pootle.
Change-Id: I54e478a30e02bdefd1b8fa53c4b66d84ffb04185
(And surrounding portions of the "btCoreData" module.)
* Rewrote the main "l2cap.h" header representing protocol constants
and structures. Now conforms to general Haiku naming conventions
rather than BSD ones. Some more constants added/removed based
on the most recent Bluetooth specification.
* Rewrote all code derived from the BSDs to match Haiku conventions
and structures in the driver.
* Dropped the "channel" and "frame" structures from "btCoreData".
Channels are now managed by L2capEndpoints, and "frames" are
now just plain net_buffers without surrounding structures.
This also makes state management much simpler.
* Made it so that actual net_buffers are passed through to the
l2cap_receive function rather than another data structure.
A fake interface address is used to communicate connection
information. (This probably ought to be changed, though.)
* Get rid of l2cap_lower and l2cap_upper abstractions.
Everything related to channel/endpoint management is now
done in L2capEndpoint, while buffer reception is handled
directly in l2cap_receive and elsewhere, same as other drivers.
* Wire up more hooks and fix module flags (needed to be able to
get the module loaded and opening sockets at all.)
* Implement an actual locking strategy in L2capEndpoint
and HciConnection. There's still problems with lifetime
management, but at least thread-safety is mostly handled.
* Create an L2capEndpointManager and use it to manage
the endpoints, rather than having a single (unsafe)
linked-list.
And plenty of other refactorings and cleanups besides.
There's still more to be done for Bluetooth overall, though:
* The "btCoreData" and "hci" modules also badly need a major
overhaul, and should be merged into a single "bluetooth"
bus_manager. They also shouldn't be passing around pointers
to other modules like this.
* There's a number of TODOs/FIXMEs in the L2CAP module, most
notably around timeouts (especially command timeouts) and
parameter validation/specification.
Tested by myself with kallisti5's help. Incoming connections
(on the PSM for SDP) get all the way to the latter half
of the Configuration step before hanging.
* our ip modules don't support connect()/send(). Just use sendto().
* ping6 disappears, ping supports -4 or -6 to force IPv4 or IPv6
Change-Id: I1e982e354cc75d3a314c5bbbfffa0373e8f4d9af
Reviewed-on: https://review.haiku-os.org/c/haiku/+/7427
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Requires multiple media server restarts to switch
outputs to it, but that's a known media services
problem (#12777 and #12776.)
Input doesn't work quite right with the hardware
I've been testing with, but that's also a known
problem it seems (#9951). Meanwhile, output
seems to work pretty well, once it gets going.
* Rename the "tun" network device to "tunnel". FreeBSD calls theirs
"tuntap" but speaks of both TUN and TAP devices as interfaces for
tunnels. The other BSDs seem to do likewise.
* Fold the "tun" driver into the "tunnel" network device. The
network device now publishes entries in devfs when interfaces
are created, and unpublishes them when interfaces are destroyed.
This removes the need for the driver and device to communicate
through a file descriptor, and thus allows the receive queue
to be totally eliminated, massively simplifying that logic.
* Use standard net-stack FIFOs instead of TCP BufferQueue, which is
specialized to TCP's needs in far too many ways. Thanks to the
previous commit adding support for interrupting semaphore waits,
we can use the FIFO wait mechanisms, too.
* Restructure the TAP logic, and generate MAC addresses more like
Linux does.
* Actually set type = IFT_TUN, and use the "loopback" frame handler
instead of the "ethernet" frame handler. This allows significant
cleanup of the header handling logic.
* In TUN mode, reject packets that don't look like IP packets.
* Delete "tunconfig"; it was mostly stubs and is now unnecessary.
TUN mode tested and confirmed as working by kallisti5 with OpenVPN.
TAP mode partially tested, but not yet confirmed as working.
Fixes #18673.
Change-Id: Ibd803139474e8db556a4f567901da15ee4083621
Reviewed-on: https://review.haiku-os.org/c/haiku/+/7143
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
* Assists on early boot platforms to install / upgrade when
no network is available.
* Doesn't introduce any additional dependencies
* Creates shine-though directories too.
Change-Id: I11dd207b2ffbae1768bab7a118a51034df238878
Reviewed-on: https://review.haiku-os.org/c/haiku/+/6185
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Tested-by: Automation <automation@haiku-os.org>
Reviewed-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
It was used only for playing CDs via SCSI commands, which is what
CDPlayer also did; but this is not really much supported anymore,
so CDPlayer was removed years ago, and now this is too.
Its source code lives on at HaikuArchives.
Fixes #18236.
This will allow proper operation of POSIX SHM API (shm_open etc.).
Now memory files are stored fully in memory and do not affect disk
storage (except swap if enabled).
Change-Id: Iae3ce1afa968df72e82198e598a273cbf7cb0269
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5802
Reviewed-by: Fredrik Holmqvist <fredrik.holmqvist@gmail.com>
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
They are now created from a separate repository and via HaikuPorts.
Since the HaikuPorts packages are not yet in the BuildPackageRepository,
the actual section that adds the packages is commented out (but it only
runs for release-* targets anyway.)
The "welcome", "userguide", and "quicktour" scripts, which are symlinked
from the desktop in release builds, are added to the Haiku package's
"regular" profile instead (they do not actually require the other packages
to be installed but will detect if they are not and launch the online
versions instead.)
Based on usb_ecm and other native USB ethernet drivers which share a
similar structure.
References used to implement this:
- FreeBSD urndis driver
- [MS-RNDIS].pdf v20140501
- Microsoft list of RNDIS OIDs
TODO:
- Better handling of "request id" field to make sure the replies we get
match up with the requests we sent, and it could allow to have
multiple requests in flight. However, the FreeBSD driver doesn't
bother to implement this, if you only ever have one request in flight
and wait for a reply before sending another, this isn't really needed.
- Endian safety, this code will only work on little endian systems for
now. Several structures sent/received to/from the device must be little
endian, so on big endian platforms a lot of byteswapping will be needed,
or the code rewritten to use some smarter object and not a plain
struct for all of these.
- Investigate if it's possible to send/receive multiple ethernet frames
in a single USB transaction for better performance. Our driver
structure doesn't really allow for it unless the driver implements
some buffering on its own.
Change-Id: I2c6dacf0c1aeb6c7c1c112e9b16a63e586ea979a
Reviewed-on: https://review.haiku-os.org/c/haiku/+/5281
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
It doesn't seem to work anymore, and it doesn't look to be particularly
maintained on FreeBSD's side of things. I think kallisti5 was the only
person who ever even attempted to use it.
libtermcap was deprecated in favor of terminfo in 2013; the library was
removed then, and this file was only left because not all optional
packages had yet been rebuilt against ncurses. Well, that has now
long been completed, and indeed all applications continue to function
even after removing /etc/termcap.
In case any legacy applications that I have missed still do need it,
it should be provided by HaikuPorts and not Haiku itself.
The other Atheros drivers are "atheros813x" and "atheroswifi",
so renaming this one (which is the oldest of the set) to match
the other two makes sense.
This reverts commit a0db7ef2729955d83f002b51034f0dedd39b4a0a.
This reverts commit 40cdf7d607211c5f27854cd3048ac00e8baf20ab.
This reverts commit 2ff22d6734176a2cf93a05c6842f69ef59d27a26.
This reverts commit b9eacd390dbdf776561062b324dab4c6f5a0dc80.
This partially reverts commit 5ae7ac5fd9957b3ff9faf211fd66976170c21b2c.
This was all added in the run-up to the removal of the framebuffer driver,
or was added since then to enhance framebuffer-only support in that driver.
Change-Id: I32ab8199f22cf6846545ae19e943c98012b2a1d0
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4615
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Change-Id: I44211b3533f99338d7246e88593fc8838628904c
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4485
Reviewed-by: Alex von Gluck IV <kallisti5@unixzen.com>
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
This translator only supports still images for now, and supports both
decoding and encoding.
Encoding support has been tested only with aom, rav1e doesn’t build on
Haiku yet, see https://github.com/haikuports/haikuports/pull/5534 for
one of the missing dependencies.
Change-Id: I716f4b862ed316b89b227bfed38072d72074201f
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3040
Reviewed-by: waddlesplash <waddlesplash@gmail.com>
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
Tested-by: Commit checker robot <no-reply+buildbot@haiku-os.org>
* virtio_mmio for riscv64,arm,arm64
* enable new FDT bus for riscv64,arm,arm64
Change-Id: I5141de4e0bfcb44c5368dfafdf68ebf06ca5fb93
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4063
Reviewed-by: Jérôme Duval <jerome.duval@gmail.com>
Once change 2342 is in place (running first boot scripts exported from
packages), see https://review.haiku-os.org/c/haiku/+/2342,
remove data/system/boot/post_install/add_catalog_entry_attributes.sh
and related support infrastructure (magic files, launch_roster entries).
The work this script did can in fact be done at image creation time
instead of at first boot.
Change-Id: I485e1a0a87c3e6a6ba3f882e65996f2327134d37
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3751
Reviewed-by: Adrien Destugues <pulkomandy@gmail.com>
