xz_utils-5.0.4: convert recipe to an actual recipe

app-arch/xz_utils/xz_utils-5.0.4.recipe

@@ -1,37 +1,108 @@
-DESCRIPTION="XZ Utils is data compression software for working with LZMA compressed files."
+SUMMARY="Free general-purpose data compression software"
 HOMEPAGE="http://tukaani.org/xz/"
 SRC_URI="http://tukaani.org/xz/xz-5.0.4.tar.bz2"
 CHECKSUM_MD5="741cd3a5f64b23b7bac56ec5b2258715"
+LICENSE="
+	GNU LGPL v2.1
+	GNU GPL v2
+	GNU GPL v3
+	"
+COPYRIGHT="2005-2012 Lasse Collin"
 REVISION="1"
-STATUS_HAIKU="stable"
-MESSAGE="This port only builds with gcc4."
-DEPEND=""
+ARCHITECTURES="x86"
+if [ $effectiveTargetArchitecture != x86_gcc2 ]; then
+	# x86_gcc2 is fine as primary target architecture as long as we're building
+	# for a different secondary architecture.
+	ARCHITECTURES="$ARCHITECTURES x86_gcc2"
+else
+	ARCHITECTURES="$ARCHITECTURES !x86_gcc2"
+fi
+SECONDARY_ARCHITECTURES="x86"
+
+# On x86_gcc2 we don't want to install the commands in bin/<arch>/, but in bin/.
+commandSuffix=$secondaryArchSuffix
+commandBinDir=$binDir
+if [ "$targetArchitecture" = x86_gcc2 ]; then
+	commandSuffix=
+	commandBinDir=$prefix/bin
+fi
+
+PROVIDES="
+	xz_utils$secondaryArchSuffix = $portVersion compat >= 5
+	cmd:lzcat$commandSuffix = $portVersion compat >= 5
+	cmd:lzcmp$commandSuffix = $portVersion compat >= 5
+	cmd:lzdiff$commandSuffix = $portVersion compat >= 5
+	cmd:lzegrep$commandSuffix = $portVersion compat >= 5
+	cmd:lzfgrep$commandSuffix = $portVersion compat >= 5
+	cmd:lzgrep$commandSuffix = $portVersion compat >= 5
+	cmd:lzless$commandSuffix = $portVersion compat >= 5
+	cmd:lzma$commandSuffix = $portVersion compat >= 5
+	cmd:lzmadec$commandSuffix = $portVersion compat >= 5
+	cmd:lzmainfo$commandSuffix = $portVersion compat >= 5
+	cmd:lzmore$commandSuffix = $portVersion compat >= 5
+	cmd:unlzma$commandSuffix = $portVersion compat >= 5
+	cmd:unxz$commandSuffix = $portVersion compat >= 5
+	cmd:xz$commandSuffix = $portVersion compat >= 5
+	cmd:xzcat$commandSuffix = $portVersion compat >= 5
+	cmd:xzcmp$commandSuffix = $portVersion compat >= 5
+	cmd:xzdec$commandSuffix = $portVersion compat >= 5
+	cmd:xzdiff$commandSuffix = $portVersion compat >= 5
+	cmd:xzegrep$commandSuffix = $portVersion compat >= 5
+	cmd:xzfgrep$commandSuffix = $portVersion compat >= 5
+	cmd:xzgrep$commandSuffix = $portVersion compat >= 5
+	cmd:xzless$commandSuffix = $portVersion compat >= 5
+	cmd:xzmore$commandSuffix = $portVersion compat >= 5
+	lib:liblzma$secondaryArchSuffix = $portVersion compat >= 5
+	devel:liblzma$secondaryArchSuffix = $portVersion compat >= 5
+	"
+REQUIRES="
+	haiku$secondaryArchSuffix >= $haikuVersion
+	"
+BUILD_REQUIRES="
+	"
+BUILD_PREREQUIRES="
+	haiku${secondaryArchSuffix}_devel >= $haikuVersion
+	cmd:gcc$secondaryArchSuffix
+	cmd:ld$secondaryArchSuffix
+	cmd:libtoolize
+	cmd:make
+	"
+
+SOURCE_DIR="xz-$portVersion"
+
 BUILD()
 {
-	cd xz-5.0.4
 	touch po/t-cs.gmo
-	libtoolize --force --copy --install
-	COMMON_DOCS=`finddir B_COMMON_DOCUMENTATION_DIRECTORY`
-	./configure --prefix=`finddir B_COMMON_DIRECTORY` \
-		--docdir=$COMMON_DOCS/doc/xz \
-		--mandir=$COMMON_DOCS/man \
-		--localedir=`finddir B_COMMON_DATA_DIRECTORY`/locale
-	make
+	runConfigure --omit-dirs binDir ./configure --bindir=$commandBinDir
+	make $jobArgs
 }
 
 INSTALL()
 {
-	cd xz-5.0.4
 	make install
+
+	expanderRulesDir=$dataDir/expander/rules
+	mkdir -p $expanderRulesDir
+	cp "$portDir/sources/xz_utils-expander-rules" "$expanderRulesDir/xz_utils"
+
+	prepareInstalledDevelLibs liblzma
 }
 
 TEST()
 {
-	cd xz-5.0.4
 	make check
 }
 
-LICENSE="GNU LGPL v2.1
-	GNU GPL v2
-	GNU GPL v3"
-COPYRIGHT="2005-2012 Lasse Collin"
+DESCRIPTION="XZ Utils is free general-purpose data compression software with high compression ratio. XZ Utils were written for POSIX-like systems, but also work on some not-so-POSIX systems. XZ Utils are the successor to LZMA Utils.
+
+The core of the XZ Utils compression code is based on LZMA SDK, but it has been modified quite a lot to be suitable for XZ Utils. The primary compression algorithm is currently LZMA2, which is used inside the .xz container format. With typical files, XZ Utils create 30 % smaller output than gzip and 15 % smaller output than bzip2.
+
+XZ Utils consist of several components:
+
+    * liblzma is a compression library with API similar to that of zlib.
+    * xz is a command line tool with syntax similar to that of gzip.
+    * xzdec is a decompression-only tool smaller than the full-featured xz tool.
+    * A set of shell scripts (xzgrep, xzdiff, etc.) have been adapted from gzip to ease viewing, grepping, and comparing compressed files.
+    * Emulation of command line tools of LZMA Utils eases transition from LZMA Utils to XZ Utils.
+
+While liblzma has a zlib-like API, liblzma doesn't include any file I/O functions. A separate I/O library is planned, which would abstract handling of .gz, .bz2, and .xz files with an easy to use API."